The Influence of Passively Modeled Paraspinal Soft Tissues on Spinal Geometric Compensation: A Finite Element Analysis
Journal of Biomechanical Engineering · 01.06.2026 · 148 (6)
DOI: 10.1115/1.4071533 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Biomechanical Engineering, online erschienen am 28.04.2026. Verfasst von Adi Mithani und 2 weiteren Autor:innen. Beteiligte Einrichtung: Musculoskeletal Biomechanics Research Lab, Department of Mechanical Engineering, McGill University, 845 Sherbrooke Street W, Montréal, QC H3A 0C3, Ca…. Hauptthemen laut MEDLINE: Finite Element Analysis, Models, Biological, Spine, Paraspinal Muscles. Die Arbeit nennt 65 Literaturangaben.
Abstract (Originalsprache)
Alterations in the contributions of paraspinal soft tissues can influence the geometric profile of the spine. This study investigated the effects of passively modeled paraspinal soft tissues (i.e., paraspinal muscles and the thoracolumbar fascia (TLF)), on lumbar segmental mobility and geometric compensation, using a credible and previously validated finite element model (FEM) of the thoracolumbar spine. The model included the vertebrae, rib cage, intervertebral discs (IVDs), pelvis, ligaments, spinal and abdominal muscles, and the TLF. The model was subjected to 30 deg and 60 deg flexion rotation with a fixed pelvic support, and an applied follower load of 1175 N, increasing by 2.4% at each segmental level. Changes in lumbar L2–S1 intervertebral rotation (IVR), lumbar and thoracic range of motion (RoM), and curvature were analyzed for cases involving removal and increased stiffening of the paraspinal muscles and the TLF. Increasing TLF stiffness reduced lumbar RoM (5.1 deg) at 60 deg flexion relative to the validated model, with compensatory increases of 3.6 deg in thoracic RoM. Increases in lumbar lordosis (3.6 deg) were proportional to increases in thoracic kyphosis (3.3 deg). Similar effects of reduced magnitude were observed in 30 deg flexion. Inverse effects were observed following TLF removal. However, no changes were observed with changes in paraspinal muscle contribution. These findings suggest that changes in TLF stiffness influence lumbar segmental mobility and drive compensatory adjustments in the spinal geometric profile.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Autor:innen und Institutionen
- Musculoskeletal Biomechanics Research Lab, Department of Mechanical Engineering, McGill University, 845 Sherbrooke Street W, Montréal, QC H3A 0C3, Canada; Orthopaedic Research Lab, Montreal General Hospital, 1650 Cedar…
- McGill University.
- Orthopaedic Research Lab, Montreal General Hospital, 1650 Cedar Avenue (LS1.409), Montreal, QC H3G 1A4, Canada.
ORCID-Profile: Adi Mithani
Zitieren
APA
Mithani, A., Aoude, A., & Driscoll, M. (2026). The Influence of Passively Modeled Paraspinal Soft Tissues on Spinal Geometric Compensation: A Finite Element Analysis. Journal of Biomechanical Engineering, 148(6). https://doi.org/10.1115/1.4071533
Vancouver
Mithani A, Aoude A, Driscoll M. The Influence of Passively Modeled Paraspinal Soft Tissues on Spinal Geometric Compensation: A Finite Element Analysis. Journal of Biomechanical Engineering. 2026;148(6). doi:10.1115/1.4071533
BibTeX
@article{Mithani2026,
author = {Mithani, Adi and Aoude, Ahmed and Driscoll, Mark},
title = {The Influence of Passively Modeled Paraspinal Soft Tissues on Spinal Geometric Compensation: A Finite Element Analysis},
journal = {Journal of Biomechanical Engineering},
year = {2026},
volume = {148},
number = {6},
doi = {10.1115/1.4071533}
}
EUVIMED