Prediction of Dynamic Cuttings Behavior of Eccentric Annulus in High-Inclination Well Based on Numerical Simulation
Journal of Energy Resources Technology, Part B: Subsurface Energy and Carbon Capture · 01.08.2026 · 2 (4)
DOI: 10.1115/1.4071470 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Energy Resources Technology, Part B: Subsurface Energy and Carbon Capture, online erschienen am 06.04.2026. Verfasst von Ting Hu und 5 weiteren Autor:innen. Die Arbeit nennt 35 Literaturangaben. Gefördert von: China University of Petroleum, Beijing, Jilin University, National Natural Science Foundation of China.
Abstract (Originalsprache)
The unique geometry of high-angle wellbores promotes the deposition of drill cuttings at the bottomhole, leading to the formation of cuttings beds. This accumulation increases friction torque and reduces the rate of penetration of the drilling string, and even causes other severe accidents. Therefore, it is necessary to study the cutting transport mechanism of high-inclination wells and improve the efficiency of wellbore cleaning. In this study, an eccentric annulus model closely representing the actual drilling conditions of high-inclination wells was established based on the Eulerian model for two-phase flow, while simultaneously accounting for drill pipe rotation and orbital motion. Numerical simulations were subsequently performed to investigate the cuttings transport behavior in drilling fluid. We verified the improvement degree of the drilling pipe orbital motion of the wellbore cleaning (the thickness of the cuttings bed has decreased by 50%) and clarified the cuttings transport mechanism in the real-drilling environment of the high-inclination well by comparing it with the drill pipe static model and the drill pipe rotation model. The results indicated that wellbore cleaning efficiency can be improved by appropriately increasing the well deviation angle, drill pipe orbital velocity, drill pipe rotation velocity, drilling fluid displacement, and drilling fluid viscosity. According to the research results, it can be used to predict the behavior of cuttings in high-inclination wells and provide theoretical support for wellbore cleaning and safe drilling.
Förderung
- China University of Petroleum, Beijing
- Jilin University
- National Natural Science Foundation of China
Zitieren
APA
Hu, T., Cui, Y., Yuan, Y., Wang, Y., Zhao, Z., & Feng, Z. (2026). Prediction of Dynamic Cuttings Behavior of Eccentric Annulus in High-Inclination Well Based on Numerical Simulation. Journal of Energy Resources Technology, Part B: Subsurface Energy and Carbon Capture, 2(4). https://doi.org/10.1115/1.4071470
Vancouver
Hu T, Cui Y, Yuan Y, Wang Y, Zhao Z, Feng Z. Prediction of Dynamic Cuttings Behavior of Eccentric Annulus in High-Inclination Well Based on Numerical Simulation. Journal of Energy Resources Technology, Part B: Subsurface Energy and Carbon Capture. 2026;2(4). doi:10.1115/1.4071470
BibTeX
@article{Hu2026,
author = {Hu, Ting and Cui, Yunfeng and Yuan, Yilong and Wang, Yu and Zhao, ZhenCheng and Feng, Zhuang},
title = {Prediction of Dynamic Cuttings Behavior of Eccentric Annulus in High-Inclination Well Based on Numerical Simulation},
journal = {Journal of Energy Resources Technology, Part B: Subsurface Energy and Carbon Capture},
year = {2026},
volume = {2},
number = {4},
doi = {10.1115/1.4071470}
}
EUVIMED