EUVIMEDEUVIMED entdecken
Crossref

Numerical Study on the Thermal Management Performance of Immersion Cooling for Cylindrical Lithium-Ion Batteries Under Multiparameter Conditions

Yuqian Fan, Meng Sun, Linbing Wang, Xiaoheng Fu, Jifei Zhao, Leyang Li, Hao Li, Xiaoying Wu, Junpeng Xu, Zhipeng Qu, Guohong Gao, Fuquan Nie

Journal of Thermal Science and Engineering Applications · 01.11.2026 · 18 (11)

DOI: 10.1115/1.4071432 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Thermal Science and Engineering Applications, online erschienen am 10.06.2026. Verfasst von Yuqian Fan und 11 weiteren Autor:innen. Die Arbeit nennt 38 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Fast charging at C-rates ≥4C poses thermal challenges for lithium-ion batteries, as conventional cooling strategies cannot adequately suppress hotspots or temperature non-uniformity at these rates. In this study, a multiparameter computational fluid dynamics (CFD) framework is developed to evaluate immersion cooling for cylindrical battery modules, considering four coolant categories, flow velocities ranging from 0.00125 to 0.05 m/s, and charging rates from 1C to 4C. The model integrates validated heat generation properties with anisotropic thermal properties to capture the combined effects of coolant type, flow velocity, and charge rate. The results demonstrate that coolants with high-thermal conductivity (e.g., Novec series) suppress 4C hotspots but require high pumping power, whereas coolants with high specific heat (e.g., Poly-alpha-olefins (PAO), Shell Thermal Fluid) achieve increased energy efficiency at 1–2C. Low-viscosity coolants (e.g., mineral oil and esters) reduce circulation losses but underperform under high-thermal loads, whereas high-stability coolants (e.g., silicone oil) provide uniform temperature fields but with significant energy costs. In addition to the coolant type, the flow velocity is a key factor, with improvements plateauing at rates greater than 0.02 m/s, and outlet-adjacent regions are identified as critical risks via hotspot mapping. This study provides practical guidelines for immersion-based Battery Thermal Management System (BTMS) design in fast-charging electric vehicles and stationary energy storage systems and lays the foundation for integrating aging mechanisms and intelligent flow control.

Zitieren

APA

Fan, Y., Sun, M., Wang, L., Fu, X., Zhao, J., Li, L., Li, H., Wu, X., Xu, J., Qu, Z., Gao, G., & Nie, F. (2026). Numerical Study on the Thermal Management Performance of Immersion Cooling for Cylindrical Lithium-Ion Batteries Under Multiparameter Conditions. Journal of Thermal Science and Engineering Applications, 18(11). https://doi.org/10.1115/1.4071432

Vancouver

Fan Y, Sun M, Wang L, Fu X, Zhao J, Li L, et al. Numerical Study on the Thermal Management Performance of Immersion Cooling for Cylindrical Lithium-Ion Batteries Under Multiparameter Conditions. Journal of Thermal Science and Engineering Applications. 2026;18(11). doi:10.1115/1.4071432

BibTeX
@article{Fan2026,
  author = {Fan, Yuqian and Sun, Meng and Wang, Linbing and Fu, Xiaoheng and Zhao, Jifei and Li, Leyang and Li, Hao and Wu, Xiaoying and Xu, Junpeng and Qu, Zhipeng and Gao, Guohong and Nie, Fuquan},
  title = {Numerical Study on the Thermal Management Performance of Immersion Cooling for Cylindrical Lithium-Ion Batteries Under Multiparameter Conditions},
  journal = {Journal of Thermal Science and Engineering Applications},
  year = {2026},
  volume = {18},
  number = {11},
  doi = {10.1115/1.4071432}
}
Kostenlos starten →