EUVIMEDEUVIMED entdecken
Crossref

Research on Full Closed-Loop Control of Suspended Four-Cable-Driven Parallel Mechanism With Multisource Sensor Fusion

Yuan-hang Wen, Jia-le Liang, Chun-tian Song, Jie-fan Fang, Jie-jun Liang, De-yu Liang, Jia-si Mo

Journal of Mechanisms and Robotics · 01.05.2026 · 18 (5)

DOI: 10.1115/1.4071414 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Mechanisms and Robotics, online erschienen am 13.04.2026. Verfasst von Yuan-hang Wen und 6 weiteren Autor:innen. Die Arbeit nennt 47 Literaturangaben. Gefördert von: Guangdong Science and Technology Department, National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study addresses the challenge of controlling an under-constrained, suspended four-cable-driven parallel mechanism (CDPM). The inherent geometrico-static problem introduces complex inverse kinematics and forces a trade-off between computational efficiency and control precision. To improve trajectory tracking accuracy, a novel fully closed-loop, real-time control strategy is proposed. First, for the configuration in which cables are attached to the four vertices of a rigid square moving platform, numerical iterative simulations were carried out in matlab r2021a. These simulations solved the inverse kinematics and revealed a functional relationship coupling the moving platform's translational and rotational motions. Next, a motion controller for the CDPM was designed and optimized. To avoid the high computational cost of numerical iterative methods—which is prohibitive for real-time closed-loop control—and to prevent pseudo-drag in the cables, the derived coupling function was innovatively applied as an empirical model. By integrating a 6-degree-of-freedom motion tracking system and tension sensors, a double closed-loop proportional–integral–differential (PID) control was successfully implemented. Experimental results show that the proposed control strategy achieves significantly higher stability, accuracy, and real-time performance compared with open-loop control. The average end-effector trajectory tracking error decreased from 2.2312 mm to 0.3465 mm, representing an 84.5% improvement in positioning accuracy. Moreover, the Fréchet distance, a measure of trajectory similarity, improved from 3.0952 to 0.9287, indicating a 70.0% performance enhancement. This research demonstrates that empirical model-based double closed-loop PID control offers an effective solution for the real-time control of complex CDPMs. It provides critical technical support for deploying CDPMs in high-precision industrial applications.

Förderung

  • Guangdong Science and Technology Department
  • National Natural Science Foundation of China

Zitieren

APA

Wen, Y., Liang, J., Song, C., Fang, J., Liang, J., Liang, D., & Mo, J. (2026). Research on Full Closed-Loop Control of Suspended Four-Cable-Driven Parallel Mechanism With Multisource Sensor Fusion. Journal of Mechanisms and Robotics, 18(5). https://doi.org/10.1115/1.4071414

Vancouver

Wen Y, Liang J, Song C, Fang J, Liang J, Liang D, et al. Research on Full Closed-Loop Control of Suspended Four-Cable-Driven Parallel Mechanism With Multisource Sensor Fusion. Journal of Mechanisms and Robotics. 2026;18(5). doi:10.1115/1.4071414

BibTeX
@article{Wen2026,
  author = {Wen, Yuan-hang and Liang, Jia-le and Song, Chun-tian and Fang, Jie-fan and Liang, Jie-jun and Liang, De-yu and Mo, Jia-si},
  title = {Research on Full Closed-Loop Control of Suspended Four-Cable-Driven Parallel Mechanism With Multisource Sensor Fusion},
  journal = {Journal of Mechanisms and Robotics},
  year = {2026},
  volume = {18},
  number = {5},
  doi = {10.1115/1.4071414}
}
Kostenlos starten →