Tailoring Thermal and Mechanical Performance Through Multimaterial Laser Powder Directed Energy Deposition of Copper and 17-4PH Stainless Steel
Journal of Manufacturing Science and Engineering · 01.06.2026 · 148 (6)
DOI: 10.1115/1.4071401 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Manufacturing Science and Engineering, online erschienen am 26.03.2026. Verfasst von Lauren Heinrich und 7 weiteren Autor:innen. Die Arbeit nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Basic Energy Sciences, Office of Technology Development.
Abstract (Originalsprache)
This study investigates the additive manufacturing (AM) processing, microstructural evolution, and resulting mechanical and thermal properties of multimaterial components combining 17-4PH stainless steel and pure copper (Cu) fabricated via laser powder directed energy deposition (LP-DED). Conventional tooling steels exhibit limited thermal conductivity, significantly constraining production throughput in high-volume processes. Incorporating Cu, with its superior thermal conductivity, could significantly enhance tool performance, though Cu and steel present metallurgical incompatibilities when processed via AM. A systematic investigation was conducted across compositions ranging from 0 to 100 wt% Cu, revealing critical thresholds influencing solidification behavior, defect formation, microstructure, hardness, and thermal transport. Optical microscopy, electron backscatter diffraction (EBSD), hardness testing, and thermal conductivity measurements provided comprehensive process–structure–property correlations. Severe hot cracking occurred at low-Cu contents (6–25 wt%), aligning generally well with crack susceptibility modeling, with an unexpected discrepancy at 25 wt%. Porosity remained low (≥99% dense) throughout the compositional spectrum. EBSD analysis revealed a transformation from columnar martensitic structures at low-Cu contents to equiaxed FCC Cu-dominated structures at higher Cu concentrations, highlighting the complex microstructural transitions driven by Cu-induced changes in solidification and phase stability. Hardness decreased from 330 HV (pure 17-4PH) to 62 HV (pure Cu), consistent with microstructural changes. Concurrently, thermal conductivity improved substantially from 13.5 W/m K to 367.9 W/m K, emphasizing Cu’s dominant role in thermal transport. The findings highlight the feasibility of leveraging compositional gradients between 17-4PH and Cu to achieve tailored tooling with optimized thermal and mechanical performance.
Förderung
- Basic Energy Sciences
- Office of Technology Development
Zitieren
APA
Heinrich, L., Hoffmann, M., Herberger, C., Kannan, R., Nandwana, P., Fillingim, K. B., Saldaña, C., & Feldhausen, T. (2026). Tailoring Thermal and Mechanical Performance Through Multimaterial Laser Powder Directed Energy Deposition of Copper and 17-4PH Stainless Steel. Journal of Manufacturing Science and Engineering, 148(6). https://doi.org/10.1115/1.4071401
Vancouver
Heinrich L, Hoffmann M, Herberger C, Kannan R, Nandwana P, Fillingim KB, et al. Tailoring Thermal and Mechanical Performance Through Multimaterial Laser Powder Directed Energy Deposition of Copper and 17-4PH Stainless Steel. Journal of Manufacturing Science and Engineering. 2026;148(6). doi:10.1115/1.4071401
BibTeX
@article{Heinrich2026,
author = {Heinrich, Lauren and Hoffmann, Miguel and Herberger, Callan and Kannan, Rangasayee and Nandwana, Peeyush and Fillingim, Kenton B. and Saldaña, Christopher and Feldhausen, Thomas},
title = {Tailoring Thermal and Mechanical Performance Through Multimaterial Laser Powder Directed Energy Deposition of Copper and 17-4PH Stainless Steel},
journal = {Journal of Manufacturing Science and Engineering},
year = {2026},
volume = {148},
number = {6},
doi = {10.1115/1.4071401}
}
EUVIMED