EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Selecting Laminate Configurations for Training a DeepONet to Predict Incremental Hole-Drilling Calibration Constants in Fiber-Reinforced Plastic Laminates

Seung-Woo Lee, Teubes C. Smit, Do-Nyun Kim, Robert G. Reid

Journal of Engineering Materials and Technology · 01.07.2026 · 148 (3)

DOI: 10.1115/1.4071199 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Engineering Materials and Technology, online erschienen am 26.03.2026. Verfasst von Seung-Woo Lee und 3 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Trade, Industry and Energy, National Research Foundation of Korea.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Measuring residual stress is critical for assessing the structural integrity and performance of fiber-reinforced plastic (FRP) laminates. The incremental hole-drilling (IHD) method, a common technique for this purpose, relies on calibration constants that are typically determined through computationally intensive finite element (FE) analyses for each unique laminate configuration. While deep operator networks (DeepONet) can serve as efficient surrogate models, the optimal strategy for composing the necessary training data has not been fully established. In this work, a simple yet effective strategy for training data selection is proposed, which is shown to reduce error in predicted stress by 12.4–15.2% over uniform random selection. Further analysis of training data length with the proposed selection strategy shows that acceptable test error, within the inherent uncertainty of the IHD method, can be achieved using just a small fraction of the possible laminate configurations. In this study, strategically selecting only 15 laminate configurations for training, out of the 70 possible laminate configurations, provided acceptable accuracy for complex residual stress profiles, including steep gradients. These findings provide a practical framework for developing reliable surrogate models, making computationally demanding residual stress analyses more accessible for the design and validation of composite structures.

Förderung

  • Ministry of Trade, Industry and Energy
  • National Research Foundation of Korea

Zitieren

APA

Lee, S., Smit, T. C., Kim, D., & Reid, R. G. (2026). Selecting Laminate Configurations for Training a DeepONet to Predict Incremental Hole-Drilling Calibration Constants in Fiber-Reinforced Plastic Laminates. Journal of Engineering Materials and Technology, 148(3). https://doi.org/10.1115/1.4071199

Vancouver

Lee S, Smit TC, Kim D, Reid RG. Selecting Laminate Configurations for Training a DeepONet to Predict Incremental Hole-Drilling Calibration Constants in Fiber-Reinforced Plastic Laminates. Journal of Engineering Materials and Technology. 2026;148(3). doi:10.1115/1.4071199

BibTeX
@article{Lee2026,
  author = {Lee, Seung-Woo and Smit, Teubes C. and Kim, Do-Nyun and Reid, Robert G.},
  title = {Selecting Laminate Configurations for Training a DeepONet to Predict Incremental Hole-Drilling Calibration Constants in Fiber-Reinforced Plastic Laminates},
  journal = {Journal of Engineering Materials and Technology},
  year = {2026},
  volume = {148},
  number = {3},
  doi = {10.1115/1.4071199}
}
Kostenlos starten →