EUVIMEDEUVIMED entdecken
Crossref

Modeling of Polymer Seals at High Cryogenic Temperatures Across the Glass Transition

Katharina Martin, Marcus Lehmann, Stefanie Reese

Journal of Applied Mechanics · 01.02.2026 · 93 (2)

DOI: 10.1115/1.4070498 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Applied Mechanics, online erschienen am 19.12.2025. Verfasst von Katharina Martin und 2 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 60 Literaturangaben. Gefördert von: Deutsches Zentrum für Luft- und Raumfahrt.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The design of polymer valve seals is challenging especially for cryogenic applications due to a significant stiffening of the polymer material when the temperature falls below its glass transition temperature. This can result in poor sealing and therefore leakage. This study numerically investigates the behavior of a polymer sealing ring used in a pressure control valve in a temperature range from room temperature to cryogenic temperatures at 173 K. To capture the significant change in the material behavior across the glass transition region as well as its characteristics at temperatures below and above, a new thermomechanically coupled model is developed. The model incorporates viscoelasticity to account for the rate-dependent material behavior by extending an existing finite strain thermo-viscoelasticity model with a generalized Zener model. Thermal aspects, such as temperature-dependent material parameters and thermal expansion, and internal heating due to viscous effects, are also taken into account. A key feature of the model is its split of the free energy into an entropic and an energy-dominated part, allowing to incorporate the transition from rubbery to glassy behavior by a temperature-dependent sigmoidal function. Mechanical and thermal material parameters, such as loss and storage moduli, thermal expansion, heat capacity, heat transfer coefficient, and glass transition temperature, are determined experimentally through dynamical mechanical analysis (DMA), differential scanning calorimetry (DSC), and thermomechanical analysis (TMA). Numerical simulations of a pressure control valve demonstrate the model’s applicability for industrial applications. This research contributes to the understanding of the mechanical and kinematic behavior of valves, in particular their polymer seal seats, at cryogenic temperatures.

Förderung

  • Deutsches Zentrum für Luft- und Raumfahrt

Zitieren

APA

Martin, K., Lehmann, M., & Reese, S. (2026). Modeling of Polymer Seals at High Cryogenic Temperatures Across the Glass Transition. Journal of Applied Mechanics, 93(2). https://doi.org/10.1115/1.4070498

Vancouver

Martin K, Lehmann M, Reese S. Modeling of Polymer Seals at High Cryogenic Temperatures Across the Glass Transition. Journal of Applied Mechanics. 2026;93(2). doi:10.1115/1.4070498

BibTeX
@article{Martin2026,
  author = {Martin, Katharina and Lehmann, Marcus and Reese, Stefanie},
  title = {Modeling of Polymer Seals at High Cryogenic Temperatures Across the Glass Transition},
  journal = {Journal of Applied Mechanics},
  year = {2026},
  volume = {93},
  number = {2},
  doi = {10.1115/1.4070498}
}
Kostenlos starten →