EUVIMEDEUVIMED entdecken
Crossref

Comparative Study of Tribological Performance of LPBF-Produced AlSi10Mg and Wrought Al6061T6 Alloys

Sonal Modi, Vishvesh Badheka

Journal of Tribology · 01.04.2026 · 148 (4)

DOI: 10.1115/1.4070390 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Tribology, online erschienen am 12.12.2025. Verfasst von Sonal Modi und 1 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 29 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The present research provides a comparative evaluation of the tribological behavior of laser powder bed fusion (LPBF)-printed AlSi10Mg alloy produced in different build directions—vertical, horizontal, and inclined (45 deg) in comparison with conventionally wrought Al6061-T6. LPBF allows the fabrication of intricate geometries and tailored microstructures. In the present study, LPBF test samples were produced with optimized process parameters: 400 W laser power, scan speed of 1200 mm/s, scan distance of 0.12 mm, and layer thickness of 40 μm. The pin-on-disc tribometer was used to measure wear-rates and friction coefficients under dry sliding conditions, considering the effects of sliding velocity, load, and track diameter. Findings reveal that LPBF-produced AlSi10Mg has enhanced wear resistance compared to wrought Al6061-T6. Interestingly, build orientation has a pronounced effect on tribological performance; inclined and vertical orientations show improved wear resistance, whereas horizontal orientation and wrought samples demonstrate higher wear loss and inconsistent friction behavior. These results show that LPBF technology presents a feasible option to produce wear-resistant components for high-performance applications. The capability to customize microstructures using build orientation in LPBF processes provides practical guidance in the selection of materials and process optimization in industries under severe service conditions.

Zitieren

APA

Modi, S., & Badheka, V. (2026). Comparative Study of Tribological Performance of LPBF-Produced AlSi10Mg and Wrought Al6061T6 Alloys. Journal of Tribology, 148(4). https://doi.org/10.1115/1.4070390

Vancouver

Modi S, Badheka V. Comparative Study of Tribological Performance of LPBF-Produced AlSi10Mg and Wrought Al6061T6 Alloys. Journal of Tribology. 2026;148(4). doi:10.1115/1.4070390

BibTeX
@article{Modi2026,
  author = {Modi, Sonal and Badheka, Vishvesh},
  title = {Comparative Study of Tribological Performance of LPBF-Produced AlSi10Mg and Wrought Al6061T6 Alloys},
  journal = {Journal of Tribology},
  year = {2026},
  volume = {148},
  number = {4},
  doi = {10.1115/1.4070390}
}
Kostenlos starten →