EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Microstructure, Hardness, and Corrosion-Wear Behavior of Nitrided Al x CoCrFeNi High-Entropy Alloy Coatings Deposited by Cold Spraying

Lina Zhu, Boya Li, Qiang Da, Kaidi Liu, Yong-kuan Zhou, Yongming Guo, Jia-jie Kang, Ding-shun She

Journal of Tribology · 01.04.2026 · 148 (4)

DOI: 10.1115/1.4070299 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Tribology, online erschienen am 22.12.2025. Verfasst von Lina Zhu und 7 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 61 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, AlxCoCrFeNi high-entropy alloy coatings were prepared on the surface of a common drilling tool material substrate of 4330V steel using cold spraying technology, followed by nitriding treatment. The microstructure, hardness, corrosion properties, and corrosion-wear mechanisms were investigated with different loads on AlxCoCrFeNi high-entropy alloy coatings. The results showed that the phase structure of the Al0.4CoCrFeNi high-entropy alloy coating was face-centered cubic (FCC), while that of the Al0.7CoCrFeNi high-entropy alloy coating was body-centered cubic (BCC). The nitriding treatment promoted the formation of nitride phases for the Al0.4CoCrFeNi and Al0.7CoCrFeNi high-entropy alloy coatings, thereby enhancing their hardness. The corrosion resistance of the Al0.7CoCrFeNi was better than that of the Al0.4CoCrFeNi high-entropy alloy coating, and the nitriding treatment consumed some of the Al, which reduced the corrosion resistance of the coatings. Regarding the corrosion-wear performance, the Al0.4CoCrFeNi high-entropy alloy coating exhibited a lower coefficient of friction and a lower corrosion-wear-rate than the Al0.7CoCrFeNi high-entropy alloy coating, and the nitriding treatment further reduced those. The main wear mechanisms for the Al0.4CoCrFeNi and Al0.7CoCrFeNi high-entropy alloy coatings before and after nitriding treatment included abrasive wear, oxidative wear, and pitting corrosion with different loads. After the nitriding treatment, the corrosion-wear reaction of the Al0.4CoCrFeNi and Al0.7CoCrFeNi high-entropy alloy coatings was weakened. However, as the load increased, the corrosive wear reactions in the coatings became more intense.

Zitieren

APA

Zhu, L., Li, B., Da, Q., Liu, K., Zhou, Y., Guo, Y., Kang, J., & She, D. (2026). Microstructure, Hardness, and Corrosion-Wear Behavior of Nitrided Al x CoCrFeNi High-Entropy Alloy Coatings Deposited by Cold Spraying. Journal of Tribology, 148(4). https://doi.org/10.1115/1.4070299

Vancouver

Zhu L, Li B, Da Q, Liu K, Zhou Y, Guo Y, et al. Microstructure, Hardness, and Corrosion-Wear Behavior of Nitrided Al x CoCrFeNi High-Entropy Alloy Coatings Deposited by Cold Spraying. Journal of Tribology. 2026;148(4). doi:10.1115/1.4070299

BibTeX
@article{Zhu2026,
  author = {Zhu, Lina and Li, Boya and Da, Qiang and Liu, Kaidi and Zhou, Yong-kuan and Guo, Yongming and Kang, Jia-jie and She, Ding-shun},
  title = {Microstructure, Hardness, and Corrosion-Wear Behavior of Nitrided Al x CoCrFeNi High-Entropy Alloy Coatings Deposited by Cold Spraying},
  journal = {Journal of Tribology},
  year = {2026},
  volume = {148},
  number = {4},
  doi = {10.1115/1.4070299}
}
Kostenlos starten →