EUVIMEDEUVIMED entdecken
Crossref

NUMERICAL DESIGN OF EXPERIMENTS FOR REPEATING LOW-PRESSURE TURBINE STAGES PART II: EFFECT OF REYNOLDS NUMBER ON DIFFERENT BLADE GEOMETRIES

Marco Rosenzweig, Melissa Kozul, Richard D. Sandberg, Giovanni Giannini, Roberto Pacciani, Michele Marconcini, Andrea Arnone, Ennio Spano, Francesco Bertini

Journal of Turbomachinery · 24.10.2025 · 1-13

DOI: 10.1115/1.4070236 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Turbomachinery, online erschienen am 24.10.2025. Verfasst von Marco Rosenzweig und 8 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The complex transitional and turbulent nature of unsteady flows seen in Low-Pressure Turbines (LPTs) often demands high-order methods such as Large Eddy Simulations (LES) for accurate predictions of turbine efficiency and loss generation. This study presents results from a highly resolved LES and state-of-the art Unsteady Reynolds-Averaged Navier-Stokes (URANS) database for three newly designed LPT profiles. These are a conventional standard lift profile, a front-loaded high-lift profile, and an aft-loaded profile. Each profile is evaluated individually within a repeating 1.5-stage LPT configuration operating under engine-like conditions at an isentropic exit Mach number of 0.3. A Reynolds number sweep, ranging from 70,000 to 320,000, captures a broad spectrum of engine-relevant flow conditions. The LES study incorporates time-resolved, time-averaged, and phase-locked averaged results, enabling a detailed examination of unsteady flow phenomena such as blade-wake interactions, unsteady boundary layer evolution, and loss generation mechanisms. Complementary URANS calculations of the same configurations are undertaken and compared with the LES data. While trends are largely recovered, important differences with the LES data can be identified. These are especially present for the aft-loaded profile, it being a radical blade design compared to conventional profiles, highlighting the necessity for turbulence and transition modelling improvements when considering more aggressive blade designs. Ultimately, this work advances the understanding of unsteady aerodynamic phenomena in LPTs via LES and lays the foundation for the development of more accurate URANS models.

Zitieren

APA

Rosenzweig, M., Kozul, M., Sandberg, R. D., Giannini, G., Pacciani, R., Marconcini, M., Arnone, A., Spano, E., & Bertini, F. (2025). NUMERICAL DESIGN OF EXPERIMENTS FOR REPEATING LOW-PRESSURE TURBINE STAGES PART II: EFFECT OF REYNOLDS NUMBER ON DIFFERENT BLADE GEOMETRIES. Journal of Turbomachinery, 1-13. https://doi.org/10.1115/1.4070236

Vancouver

Rosenzweig M, Kozul M, Sandberg RD, Giannini G, Pacciani R, Marconcini M, et al. NUMERICAL DESIGN OF EXPERIMENTS FOR REPEATING LOW-PRESSURE TURBINE STAGES PART II: EFFECT OF REYNOLDS NUMBER ON DIFFERENT BLADE GEOMETRIES. Journal of Turbomachinery. 2025:1-13. doi:10.1115/1.4070236

BibTeX
@article{Rosenzweig2025,
  author = {Rosenzweig, Marco and Kozul, Melissa and Sandberg, Richard D. and Giannini, Giovanni and Pacciani, Roberto and Marconcini, Michele and Arnone, Andrea and Spano, Ennio and Bertini, Francesco},
  title = {NUMERICAL DESIGN OF EXPERIMENTS FOR REPEATING LOW-PRESSURE TURBINE STAGES PART II: EFFECT OF REYNOLDS NUMBER ON DIFFERENT BLADE GEOMETRIES},
  journal = {Journal of Turbomachinery},
  year = {2025},
  pages = {1--13},
  doi = {10.1115/1.4070236}
}
Kostenlos starten →