EUVIMEDEUVIMED entdecken
Crossref

Wind Tunnel Testing at TRL4 of EBC-Coated SIC/SIC Nozzle Guide Vanes for High-Pressure Turbines With Trailing Edge Cooling

Anna Petersen, Benjamin Dimond, Anna-Samira Söhngen, Fabia Süß, Andrea Ebach-Stahl, Ravisankar Naraparaju, Michael Hilfer, Robin G. Brakmann

Journal of Turbomachinery · 01.05.2026 · 148 (5)

DOI: 10.1115/1.4070234 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Turbomachinery, online erschienen am 10.12.2025. Verfasst von Anna Petersen und 7 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 59 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To fulfill the high flight requirements for a significantly lower environmental impact, new approaches to the design of engines are required. One solution to build an engine as a whole more efficiently is the use of a non-oxide ceramic matrix composite (CMC) based on silicon carbide fibers in a silicon carbide matrix (SiC/SiC) in the thermally most challenging part of the engine: The high-pressure turbine. The development of SiC/SiC CMCs presents a significant challenge, which we have addressed by producing a high-pressure turbine stator made of SiC/SiC CMC and coated with a newly developed environmental barrier coating (EBC). This advancement has elevated the development level of DLR SiC/SiC CMCs from TRL3 to TRL4. Part of this feasibility study is a test at TRL4 in the Wind Tunnel for Straight Cascades Göttingen (EGG). The vane performance at different cooling flow ratios is analyzed. The EBC has a low roughness and therefore a nearly complete laminar boundary layer on the suction side with the transition observed near the trailing edge at subsonic flow. The transition location on the suction side was detected using an infrared camera and additionally with time-resolved temperature-sensitive paint (iTSP) at different Mach and Reynolds numbers.

Zitieren

APA

Petersen, A., Dimond, B., Söhngen, A., Süß, F., Ebach-Stahl, A., Naraparaju, R., Hilfer, M., & Brakmann, R. G. (2026). Wind Tunnel Testing at TRL4 of EBC-Coated SIC/SIC Nozzle Guide Vanes for High-Pressure Turbines With Trailing Edge Cooling. Journal of Turbomachinery, 148(5). https://doi.org/10.1115/1.4070234

Vancouver

Petersen A, Dimond B, Söhngen A, Süß F, Ebach-Stahl A, Naraparaju R, et al. Wind Tunnel Testing at TRL4 of EBC-Coated SIC/SIC Nozzle Guide Vanes for High-Pressure Turbines With Trailing Edge Cooling. Journal of Turbomachinery. 2026;148(5). doi:10.1115/1.4070234

BibTeX
@article{Petersen2026,
  author = {Petersen, Anna and Dimond, Benjamin and Söhngen, Anna-Samira and Süß, Fabia and Ebach-Stahl, Andrea and Naraparaju, Ravisankar and Hilfer, Michael and Brakmann, Robin G.},
  title = {Wind Tunnel Testing at TRL4 of EBC-Coated SIC/SIC Nozzle Guide Vanes for High-Pressure Turbines With Trailing Edge Cooling},
  journal = {Journal of Turbomachinery},
  year = {2026},
  volume = {148},
  number = {5},
  doi = {10.1115/1.4070234}
}
Kostenlos starten →