EUVIMEDEUVIMED entdecken
Crossref

Direct Numerical Simulations and Boundary Layer Analysis in Compressor Blade Channel at Various Reynolds Numbers

Yang Liu, Lei Zhou, Duo Wang, Xiang Zhang, Xiaolan Chen, Weidong Shao, Hongyi Xu

Journal of Turbomachinery · 01.05.2026 · 148 (5)

DOI: 10.1115/1.4070225 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Turbomachinery, online erschienen am 10.12.2025. Verfasst von Yang Liu und 6 weiteren Autor:innen. Die Arbeit nennt 44 Literaturangaben. Gefördert von: E-Institutes of Shanghai Municipal Education Commission, Natural Science Foundation of Shanghai.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The current study investigated the boundary layer (BL) characteristics in the V103 compressor blade channel under a series of Reynolds number (Re) conditions (Re=1.367×105, Re=1.506×105, and Re=1.645×105) using direct numerical simulation (DNS). Detailed analyses were conducted on the BL, including the separation bubble, transitions, and reattachments on both the pressure and suction surfaces. The analyses suggest that Re has a very limited impact on the size of the laminar separation bubble (LSB) on the pressure surface. However, the LSB on the suction surface significantly shrinks with increasing Re. Moreover, the BL thickness identification method based on Bernoulli’s principle was applied to complex internal flows for the first time and achieved an accurate determination of BL integral quantities. The transition locations, which were estimated using the BL shape factor, shifted upstream with the increase in Re on both pressure and suction surfaces, causing the earlier reattachment points. The study also investigated velocity profiles in the turbulent region of the BLs and successfully extended the inner-layer law from the traditional flat plate to the current curved surfaces, demonstrating the validity and accuracy of the inner-layer law’s formulations in describing the turbulent boundary layer (TBL) velocity profile. These findings provide both numerical and physical insights into the complex geometry BLs in the compressor blade channel at low-to-medium Re, offering strong potential for optimizing blade design.

Förderung

  • E-Institutes of Shanghai Municipal Education Commission
  • Natural Science Foundation of Shanghai

Zitieren

APA

Liu, Y., Zhou, L., Wang, D., Zhang, X., Chen, X., Shao, W., & Xu, H. (2026). Direct Numerical Simulations and Boundary Layer Analysis in Compressor Blade Channel at Various Reynolds Numbers. Journal of Turbomachinery, 148(5). https://doi.org/10.1115/1.4070225

Vancouver

Liu Y, Zhou L, Wang D, Zhang X, Chen X, Shao W, et al. Direct Numerical Simulations and Boundary Layer Analysis in Compressor Blade Channel at Various Reynolds Numbers. Journal of Turbomachinery. 2026;148(5). doi:10.1115/1.4070225

BibTeX
@article{Liu2026,
  author = {Liu, Yang and Zhou, Lei and Wang, Duo and Zhang, Xiang and Chen, Xiaolan and Shao, Weidong and Xu, Hongyi},
  title = {Direct Numerical Simulations and Boundary Layer Analysis in Compressor Blade Channel at Various Reynolds Numbers},
  journal = {Journal of Turbomachinery},
  year = {2026},
  volume = {148},
  number = {5},
  doi = {10.1115/1.4070225}
}
Kostenlos starten →