EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Heat Transfer Measurements in a Turbine Centre Frame at Realistic Mach Number - Part 1: Baseline Study

Patrick R. Jagerhofer, Ena Badžek, Petar Bulovic, Marios Patinios, Emil Göttlich

Journal of Turbomachinery · 25.09.2025 · 1-43

DOI: 10.1115/1.4069946 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Turbomachinery, online erschienen am 25.09.2025. Verfasst von Patrick R. Jagerhofer und 4 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Österreichische Forschungsförderungsgesellschaft.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper investigates heat transfer in a turbine centre frame (TCF), a transition duct that guides the flow from the highto the low-pressure turbine. Experimental results were acquired in a high-speed wind tunnel facility at Graz University of Technology. The setup was operated at a realistic Mach number and featured a 90° sector cascade of an engine-representative TCF geometry equipped with a flow conditioning grid. Heat transfer coefficient (HTC) measurements were conducted using an advanced infrared thermography technique developed at the institute, covering the hub and struts, as well as the challenging shroud surface. This ensures complete surface coverage of a TCF passage for the first time. The HTC distribution on the hub and struts is consistent with the previous findings from similar studies, whereas the newly investigated shroud exhibits a significant increase in heat transfer around the pronounced convex bend. Heat transfer correlations, both common and adapted, are included in the discussion for additional analytical insight and interpretation. Furthermore, the results are compared with a test campaign that included a high-pressure turbine (HPT) upstream of the TCF. Finally, an attempt was made to estimate the total pressure loss of the TCF from the full surface coverage heat transfer measurements. The work presented here contributes to a deeper understanding of thermal management in TCFs and establishes a baseline for the following study that investigates the effects of combustor hot streaks on heat transfer in the turbine centre frame - Part 2.

Förderung

  • Österreichische Forschungsförderungsgesellschaft

Zitieren

APA

Jagerhofer, P. R., Badžek, E., Bulovic, P., Patinios, M., & Göttlich, E. (2025). Heat Transfer Measurements in a Turbine Centre Frame at Realistic Mach Number - Part 1: Baseline Study. Journal of Turbomachinery, 1-43. https://doi.org/10.1115/1.4069946

Vancouver

Jagerhofer PR, Badžek E, Bulovic P, Patinios M, Göttlich E. Heat Transfer Measurements in a Turbine Centre Frame at Realistic Mach Number - Part 1: Baseline Study. Journal of Turbomachinery. 2025:1-43. doi:10.1115/1.4069946

BibTeX
@article{Jagerhofer2025,
  author = {Jagerhofer, Patrick R. and Badžek, Ena and Bulovic, Petar and Patinios, Marios and Göttlich, Emil},
  title = {Heat Transfer Measurements in a Turbine Centre Frame at Realistic Mach Number - Part 1: Baseline Study},
  journal = {Journal of Turbomachinery},
  year = {2025},
  pages = {1--43},
  doi = {10.1115/1.4069946}
}
Kostenlos starten →