Optimization of Endwall Ridging for Enhanced Efficiency in Aggressive Turbine Vaned Ducts
Journal of Turbomachinery · 01.02.2026 · 148 (2)
DOI: 10.1115/1.4069807 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Turbomachinery, online erschienen am 23.10.2025. Verfasst von Virginia Bologna und 9 weiteren Autor:innen. Die Arbeit nennt 46 Literaturangaben.
Abstract (Originalsprache)
This study presents a joint experimental and numerical investigation on the impact of endwall ridging on the efficiency of a turbine nozzle guide vane (NGV). Experiments are conducted on a large-scale, low aspect ratio cascade replicating a high-diffusion stage between the high-pressure turbine (HPT) and the low-pressure turbine (LPT). The cascade is tested in its baseline configuration and with two endwall ridging devices, one of which is optimized through parametric computational fluid dynamics (CFD) simulations by varying ridge height, spacing, and position within the blade channel. A Pareto front analysis identifies the optimal configuration that maximizes flow uniformity at the cascade exit while minimizing losses. The flow field is experimentally investigated in a radial-tangential plane at the cascade exit using a five-hole probe to assess total pressure losses and flow angle uniformity, key factors for evaluating carry-over effects on the downstream row and refining CFD predictions. Additionally, CFD streamline visualizations provide further insight into the ridging device operation. The findings demonstrate that the optimized endwall ridging effectively mitigates the cross-stream flow induced by the passage vortex. As a result, flow uniformity is enhanced, leading to increased cascade efficiency compared to the baseline configuration.
Zitieren
APA
Bologna, V., Petronio, D., Simoni, D., Satta, F., Vincentiis, L. D., Rubechini, F., Giovannini, M., Paccati, S., Bertini, F., & Notaristefano, A. (2026). Optimization of Endwall Ridging for Enhanced Efficiency in Aggressive Turbine Vaned Ducts. Journal of Turbomachinery, 148(2). https://doi.org/10.1115/1.4069807
Vancouver
Bologna V, Petronio D, Simoni D, Satta F, Vincentiis LD, Rubechini F, et al. Optimization of Endwall Ridging for Enhanced Efficiency in Aggressive Turbine Vaned Ducts. Journal of Turbomachinery. 2026;148(2). doi:10.1115/1.4069807
BibTeX
@article{Bologna2026,
author = {Bologna, Virginia and Petronio, Daniele and Simoni, Daniele and Satta, Francesca and Vincentiis, Luca De and Rubechini, Filippo and Giovannini, Matteo and Paccati, Simone and Bertini, Francesco and Notaristefano, Andrea},
title = {Optimization of Endwall Ridging for Enhanced Efficiency in Aggressive Turbine Vaned Ducts},
journal = {Journal of Turbomachinery},
year = {2026},
volume = {148},
number = {2},
doi = {10.1115/1.4069807}
}
EUVIMED