Catalytic Graphitization to Valorize Char Byproducts From Pinewood Liquefaction
Journal of Energy Resources Technology, Part A: Sustainable and Renewable Energy · 01.11.2025 · 1 (6)
DOI: 10.1115/1.4069227 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Energy Resources Technology, Part A: Sustainable and Renewable Energy, online erschienen am 14.08.2025. Verfasst von Kiran Raj Goud Burra und 4 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 38 Literaturangaben. Gefördert von: Office of Energy Efficiency and Renewable Energy.
Abstract (Originalsprache)
Production of sustainable aviation fuels from abundant lignocellulosic biomass is facing techno-economic viability challenges in addition to the valorization of byproducts produced from their conversion techniques. Near-critical integrated liquefaction–extraction is an emerging technique focused on obtaining hydrotreating-compatible biocrude from lignocellulosic biomass. But, similar to other thermochemical routes, this process viability needs to be significantly improved by valorizing the char byproducts produced. Some 15–35 wt% of the lignocellulosic biomass is typically left over as the biochar from these biofuel production routes, so converting them into valuable and in-demand materials can significantly improve the biocarbon utilization and overall process economics. In this direction, converting this biochar into graphitic carbon is very promising as the need for low-carbon-footprint sustainable synthetic graphite is imminent with the growing applications in the electrochemical metallurgy, energy storage, lubrication, nuclear reactor moderation, refractory, and other emerging needs, especially for renewable energy infrastructure development. Presently, synthetic graphite is prepared from fossil oil, using a carbon-intensive process, and the purification needs require strong and corrosive acids. Catalytic graphitization of the liquefaction char provided us with a promising extent of graphitization. Catalytic graphitization was investigated here using Ni loading as the catalyst, followed by thermal treatment at 1400 °C for 3 h, and acid washing for Ni recovery. Different Ni loadings were investigated to understand its impact on the process performance. X-ray diffraction and the Raman spectroscopy were utilized for characterization of the graphitic biocarbon produced, while the thermogravimetric analysis provided information on thermal stability and inorganic impurities.
Förderung
- Office of Energy Efficiency and Renewable Energy
Zitieren
APA
Burra, K. R. G., Olawumi, D. A., Niska, J. E., Sandborn, P., & Gupta, A. K. (2025). Catalytic Graphitization to Valorize Char Byproducts From Pinewood Liquefaction. Journal of Energy Resources Technology, Part A: Sustainable and Renewable Energy, 1(6). https://doi.org/10.1115/1.4069227
Vancouver
Burra KRG, Olawumi DA, Niska JE, Sandborn P, Gupta AK. Catalytic Graphitization to Valorize Char Byproducts From Pinewood Liquefaction. Journal of Energy Resources Technology, Part A: Sustainable and Renewable Energy. 2025;1(6). doi:10.1115/1.4069227
BibTeX
@article{Burra2025,
author = {Burra, Kiran Raj Goud and Olawumi, David Akinloluwa and Niska, Janel Elizabeth and Sandborn, Peter and Gupta, Ashwani K.},
title = {Catalytic Graphitization to Valorize Char Byproducts From Pinewood Liquefaction},
journal = {Journal of Energy Resources Technology, Part A: Sustainable and Renewable Energy},
year = {2025},
volume = {1},
number = {6},
doi = {10.1115/1.4069227}
}
EUVIMED