EUVIMEDEUVIMED entdecken
Crossref

Effects of Cutback Tip Trailing Edge Squealer on Turbine Blade Tip Thermal Behaviour Under High-Speed Relative Casing Motion

Ziyang Zhang, Shaopeng Lu, Hongmei Jiang, Hongmei Li

Journal of Turbomachinery · 01.10.2025 · 147 (10)

DOI: 10.1115/1.4069159 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Turbomachinery, online erschienen am 24.07.2025. Verfasst von Ziyang Zhang und 3 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 44 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In extreme operating conditions, over-tip-leakage (OTL) flow introduces high thermal load to high-pressure turbine blade tips, which can cause severe material damage and consequently affect the performance and reliability of the entire device. Tip trailing edge region is usually the initial and most susceptible area to thermal damage. The cutback tip trailing edge squealer design is a practical engineering option to facilitate the cooling of the trailing edge. This study examined the tip aerothermal behaviour of full cavity, pressure- and suction-side cutback tip squealers. For the first time, the thermal performance of cutback tip squealer designs under high-speed relative casing motion was experimentally revealed. By Computational Fluid Dynamics (CFD) method, the results indicate that the suction-side cutback tip squealer significantly enhances the heat transfer inside the cavity due to the prolongated stay of the cavity vortex. This effect is more evident when more of the suction-side trailing edge rim is removed. The experimental results suggest that the averaged tip heat transfer coefficient of the 75% axial chord (Cx) suction-side cutback squealer is 18% higher than that of full squealer tip in the cavity floor region, and 8.44% higher in the whole blade tip region. On the other hand, the pressure-side cutback squealer exhibits close overall tip aerothermal performance to that of the full cavity tip, making it a recommended design in engineering practice. Furthermore, as the tip clearance size increases, the effects of cutback tip squealers become more insignificant.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Zhang, Z., Lu, S., Jiang, H., & Li, H. (2025). Effects of Cutback Tip Trailing Edge Squealer on Turbine Blade Tip Thermal Behaviour Under High-Speed Relative Casing Motion. Journal of Turbomachinery, 147(10). https://doi.org/10.1115/1.4069159

Vancouver

Zhang Z, Lu S, Jiang H, Li H. Effects of Cutback Tip Trailing Edge Squealer on Turbine Blade Tip Thermal Behaviour Under High-Speed Relative Casing Motion. Journal of Turbomachinery. 2025;147(10). doi:10.1115/1.4069159

BibTeX
@article{Zhang2025,
  author = {Zhang, Ziyang and Lu, Shaopeng and Jiang, Hongmei and Li, Hongmei},
  title = {Effects of Cutback Tip Trailing Edge Squealer on Turbine Blade Tip Thermal Behaviour Under High-Speed Relative Casing Motion},
  journal = {Journal of Turbomachinery},
  year = {2025},
  volume = {147},
  number = {10},
  doi = {10.1115/1.4069159}
}
Kostenlos starten →