Design, Analysis, and Experimental Research of Flexible Multi-Constraint Gripper for Nest Frames
Journal of Mechanical Design · 01.02.2026 · 148 (2)
DOI: 10.1115/1.4069074 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Mechanical Design, online erschienen am 24.07.2025. Verfasst von Maoguo Li und 6 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 23 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Heilongjiang Province.
Abstract (Originalsprache)
The grasping and shaking of the nest frames constitute a critical step in automated beekeeping operations. However, the unique structure of the nest frames imposes stringent requirements on the gripper design. In this study, first, a flexible multi-constraint gripper optimized for the nest frame grasping is proposed, including fixation mechanism, driving mechanism, and limiting mechanism. Next, kinematic and dynamic models are established, and a back propagation neural network is applied to optimize key component parameters. Finally, a virtual prototype and an experimental prototype are developed to evaluate the gripper performance through simulations and experiments. Experimental results demonstrate that the gripper achieves stable grasping of the nest frames of three different sizes. In the shaking tests, average amplitudes of 87.331 mm, 88.020 mm, and 89.721 mm are observed for 42 cm, 46 cm, and 49 cm frames, respectively, all exceeding 80 mm amplitude of the end effector of manipulator. This design is expected to advance automated beekeeping and provide new perspectives for the design and optimization of flexible end effectors in agricultural robotics.
Förderung
- National Natural Science Foundation of China
- Natural Science Foundation of Heilongjiang Province
Zitieren
APA
Li, M., Zhang, N., Xing, Y., Liu, B., Su, W., Li, S., & Sun, S. (2026). Design, Analysis, and Experimental Research of Flexible Multi-Constraint Gripper for Nest Frames. Journal of Mechanical Design, 148(2). https://doi.org/10.1115/1.4069074
Vancouver
Li M, Zhang N, Xing Y, Liu B, Su W, Li S, et al. Design, Analysis, and Experimental Research of Flexible Multi-Constraint Gripper for Nest Frames. Journal of Mechanical Design. 2026;148(2). doi:10.1115/1.4069074
BibTeX
@article{Li2026,
author = {Li, Maoguo and Zhang, Ning and Xing, Yan and Liu, Boyi and Su, Wenyuan and Li, Shiyu and Sun, Shenxin},
title = {Design, Analysis, and Experimental Research of Flexible Multi-Constraint Gripper for Nest Frames},
journal = {Journal of Mechanical Design},
year = {2026},
volume = {148},
number = {2},
doi = {10.1115/1.4069074}
}
EUVIMED