EUVIMEDEUVIMED entdecken
Crossref

A Calculation Method for Antiscuffing Load Capacity of Herringbone Gear Considering Shaft Misalignment Error

Xiangyang Xu, Peng Zhang, Linfang Fan, Shengping Mao

Journal of Mechanical Design · 01.01.2026 · 148 (1)

DOI: 10.1115/1.4068851 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Mechanical Design, online erschienen am 27.06.2025. Verfasst von Xiangyang Xu und 3 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 30 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Tooth surface scuffing strength design is an important design method to ensure the antiscuffing load capacity of herringbone gears. Shaft misalignment errors directly impact the antiscuffing load capacity of herringbone gears, which cannot be ignored in the calculation of antiscuffing load capacity. In this article, a discrete non-Hertz contact model for herringbone gears was developed to characterize the load distribution on the tooth surface under misalignment error. Based on the meshing geometrical relationships of herringbone gears under error conditions, a thermo-elastohydrodynamic lubrication (TEHL) model was established for calculating the friction coefficient on the tooth surfaces. The frictional heat flux density formula was refined, and based on the coupling iteration of the heat transfer model and the TEHL model, a scuffing load capacity calculation model for herringbone gears was established and validated through equivalent scuffing tests. The research indicates that the misalignment errors cause biased loading in herringbone gears, shifting the distribution of core temperature and oil film thickness parameters, with these shifts becoming more pronounced as errors increase. For herringbone gears with positive modifications, the contact temperature at the engaging-out point is the highest, and the oil film thickness is the smallest. As the load increases, the formation of hydrodynamic oil film becomes increasingly difficult, making scuffing failure most likely to occur. The presence of errors further deteriorates the contact conditions on the tooth surfaces, accelerating scuffing failure. This study can provide accurate and detailed theoretical support for the tooth surface scuffing strength design of herringbone gear.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Xu, X., Zhang, P., Fan, L., & Mao, S. (2026). A Calculation Method for Antiscuffing Load Capacity of Herringbone Gear Considering Shaft Misalignment Error. Journal of Mechanical Design, 148(1). https://doi.org/10.1115/1.4068851

Vancouver

Xu X, Zhang P, Fan L, Mao S. A Calculation Method for Antiscuffing Load Capacity of Herringbone Gear Considering Shaft Misalignment Error. Journal of Mechanical Design. 2026;148(1). doi:10.1115/1.4068851

BibTeX
@article{Xu2026,
  author = {Xu, Xiangyang and Zhang, Peng and Fan, Linfang and Mao, Shengping},
  title = {A Calculation Method for Antiscuffing Load Capacity of Herringbone Gear Considering Shaft Misalignment Error},
  journal = {Journal of Mechanical Design},
  year = {2026},
  volume = {148},
  number = {1},
  doi = {10.1115/1.4068851}
}
Kostenlos starten →