EUVIMEDEUVIMED entdecken
Crossref

The Impact of Manufacturing Variations on the Aerothermal Performance of High-Pressure Turbine Blade Shrouds

Bram Hulhoven, John D. Coull, Dougal Jackson, Nicholas R. Atkins

Journal of Turbomachinery · 01.11.2025 · 147 (11)

DOI: 10.1115/1.4068482 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Turbomachinery, online erschienen am 09.05.2025. Verfasst von Bram Hulhoven und 3 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 36 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

High-pressure turbine blade (HPTB) shrouds suffer manufacturing variations in both platform alignment and inter-platform gap width. Compared to hub endwalls, the aerothermal effects of shroud platform steps and gaps has had little attention, which introduces uncertainty in the sentencing of such manufacturing variations. This article presents a shroud step sentencing correlation developed using a parametric quasi-2D (Q2D) model of a shroud endwall step. The use of a Q2D model follows from the study of a 3D steady Reynolds-averaged Navier–Stokes (RANS) simulation matrix of engine-representative platform steps and gap widths, based on a sample of scanned HPTB castings and finished parts. This study showed that the aftchord shroud step flow is Q2D and resembles canonical step flow with enhanced heat transfer at the reattachment point. The shroud step sentencing correlation is tested on the platform steps in the simulation matrix giving prediction errors below 20% for the majority of cases. Finally, the correlation is tuned using experimental data to mitigate the uncertainty associated with RANS simulations of separated flows.

Zitieren

APA

Hulhoven, B., Coull, J. D., Jackson, D., & Atkins, N. R. (2025). The Impact of Manufacturing Variations on the Aerothermal Performance of High-Pressure Turbine Blade Shrouds. Journal of Turbomachinery, 147(11). https://doi.org/10.1115/1.4068482

Vancouver

Hulhoven B, Coull JD, Jackson D, Atkins NR. The Impact of Manufacturing Variations on the Aerothermal Performance of High-Pressure Turbine Blade Shrouds. Journal of Turbomachinery. 2025;147(11). doi:10.1115/1.4068482

BibTeX
@article{Hulhoven2025,
  author = {Hulhoven, Bram and Coull, John D. and Jackson, Dougal and Atkins, Nicholas R.},
  title = {The Impact of Manufacturing Variations on the Aerothermal Performance of High-Pressure Turbine Blade Shrouds},
  journal = {Journal of Turbomachinery},
  year = {2025},
  volume = {147},
  number = {11},
  doi = {10.1115/1.4068482}
}
Kostenlos starten →