EUVIMEDEUVIMED entdecken
Crossref

Experimental and Finite Element Investigations to Study the Temperature Distribution at the Orthotic Boot–Skin Interface

Nishit Pachpande, Pushkaraj Ambalgi, Ganesh M. Bapat

Journal of Thermal Science and Engineering Applications · 01.07.2025 · 17 (7)

DOI: 10.1115/1.4068365 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Thermal Science and Engineering Applications, online erschienen am 21.04.2025. Verfasst von Nishit Pachpande und 2 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 25 Literaturangaben. Gefördert von: Birla Institute of Technology and Science, Pilani.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Orthotic walker boots, commonly used for lower limb injuries, have been linked to discomfort due to increased skin temperatures, which can result in excessive sweating and skin problems. This research investigates the boot–skin temperature variation at the posterior and anterior sections of the leg after wearing an orthotic boot for an extended period. The temperature distribution at the orthotic boot–skin interface was studied using experimental measurements and finite element simulations. The temperature data were collected from eight male participants using 12 thermistors judiciously placed around the shank. The participants wore an orthotic boot for 60 min while sitting idle, and the temperature rises in the anterior and posterior regions of the leg were recorded. An average temperature rise of 2.3 °C ± 0.7 °C in the anterior region and 2.5 °C ± 0.6 °C in the posterior region was observed. These findings corroborate with the finite element simulations, which demonstrated similar temperature rise of 2.2 °C ± 0.4 °C and 2.4 °C ± 0.5 °C in the anterior and posterior regions, respectively. A statistical analysis using the seven-point Bedford scale for thermal sensation showed that the temperature rise in the posterior region was statistically significant (p = 0.022), with a higher increase noted in the posterior region compared to the anterior. The finite element simulations presented here can be used as an optimization tool to study the use of new materials and design modifications to reduce thermal discomfort in orthotic devices and exoskeletons.

Förderung

  • Birla Institute of Technology and Science, Pilani

Zitieren

APA

Pachpande, N., Ambalgi, P., & Bapat, G. M. (2025). Experimental and Finite Element Investigations to Study the Temperature Distribution at the Orthotic Boot–Skin Interface. Journal of Thermal Science and Engineering Applications, 17(7). https://doi.org/10.1115/1.4068365

Vancouver

Pachpande N, Ambalgi P, Bapat GM. Experimental and Finite Element Investigations to Study the Temperature Distribution at the Orthotic Boot–Skin Interface. Journal of Thermal Science and Engineering Applications. 2025;17(7). doi:10.1115/1.4068365

BibTeX
@article{Pachpande2025,
  author = {Pachpande, Nishit and Ambalgi, Pushkaraj and Bapat, Ganesh M.},
  title = {Experimental and Finite Element Investigations to Study the Temperature Distribution at the Orthotic Boot–Skin Interface},
  journal = {Journal of Thermal Science and Engineering Applications},
  year = {2025},
  volume = {17},
  number = {7},
  doi = {10.1115/1.4068365}
}
Kostenlos starten →