Multi-Step Tool Paths Development for Reducing Geometric Deviation and Pillow Effect in the Single-Point Incremental Forming
Journal of Manufacturing Science and Engineering · 01.07.2025 · 147 (7)
DOI: 10.1115/1.4068238 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Manufacturing Science and Engineering, online erschienen am 27.03.2025. Verfasst von Cristian Cappellini und 2 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 36 Literaturangaben.
Abstract (Originalsprache)
Single-point incremental forming (SPIF) process represents a good candidate in the Industry 4.0 panorama, whose paradigms of customized and small batch production require quick and cost-effective reconfigurations of manufacturing systems. SPIF enables the production of sheet components using simple equipment, consisting of a blank fixture and a hemispherical forming tool, without the need of dies. Despite its flexibility, this process presents springback-related drawbacks, which can limit its accuracy. Consequently, optimizing process parameters (such as feed rate, step-down size, and tool trajectory) is essential to mitigate these limitations. This study investigates how multi-step tool path strategies affect the geometric precision of walls and the occurrence of pillow defects during the incremental forming of AA1050 H24 aluminum alloy frustum cones. The findings from a comprehensive experimental campaign, which evaluated achievable geometry, applied loads, strain field, and thickness distribution, permitted the identification of best practices for improving the overall accuracy of the final product. As a result, a novel multi-step tool trajectory, concerning both a variable wall angle roughing phase and a finishing phase, has been identified as the optimal approach. This approach not only allows force reduction but also contributes to achieving a uniform thickness distribution. The results are encouraging, confirming the suitability of the proposed methodology and suggesting its diffusion at an industrial level.
Zitieren
APA
Cappellini, C., D’Urso, G., & Giardini, C. (2025). Multi-Step Tool Paths Development for Reducing Geometric Deviation and Pillow Effect in the Single-Point Incremental Forming. Journal of Manufacturing Science and Engineering, 147(7). https://doi.org/10.1115/1.4068238
Vancouver
Cappellini C, D’Urso G, Giardini C. Multi-Step Tool Paths Development for Reducing Geometric Deviation and Pillow Effect in the Single-Point Incremental Forming. Journal of Manufacturing Science and Engineering. 2025;147(7). doi:10.1115/1.4068238
BibTeX
@article{Cappellini2025,
author = {Cappellini, Cristian and D’Urso, Gianluca and Giardini, Claudio},
title = {Multi-Step Tool Paths Development for Reducing Geometric Deviation and Pillow Effect in the Single-Point Incremental Forming},
journal = {Journal of Manufacturing Science and Engineering},
year = {2025},
volume = {147},
number = {7},
doi = {10.1115/1.4068238}
}
EUVIMED