EUVIMEDEUVIMED entdecken
Vergleichsstudie

In Silico Evaluation of the Primary Stability of Acetabular Revision Cups: Standard Versus Locking Screws

Federico Andrea Bologna iD, Nicholas Elena, Davide Bentivoglio, Alessandro Aprato, Mara Terzini iD, Cristina Bignardi iD, Stefano Giaretta, Alberto Momoli

Journal of Biomechanical Engineering · 01.05.2025 · 147 (5)

DOI: 10.1115/1.4068226 ↗

Kurz gefasst

Vergleichsstudie in der Zeitschrift Journal of Biomechanical Engineering, online erschienen am 28.03.2025. Verfasst von Federico Andrea Bologna und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical and Aerospace Engineering, Politecnico di Torino, Corso Duca degli Abruzzi 24, Torino 10129, Italy; PolitoBIOMed Lab, Polite…. Hauptthemen laut MEDLINE: Acetabulum, Bone Screws, Mechanical Phenomena, Hip Prosthesis. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 35 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Given the increasing complexity of revision total hip arthroplasty, ensuring optimal stability of acetabular revision cups (ARCs) is crucial, especially in cases of bone stock loss. In this study, the primary stability of ARCs was investigated by modeling various configurations of screw placements, including all standard, all locking, and mixed setups, under different load scenarios. Finite element (FE) models were implemented to evaluate the stress distribution and micromotions at the bone–prosthesis interface, simulating three primary load cases: “walking,” “stairs-down,” and “stand-up.” The results indicated that the stairs-down load case generated the highest von Mises stresses and sliding distances, marking it as the most critical load scenario. Configurations using all standard screws showed higher peak stresses and reduced stable areas, compared to those utilizing locking screws. While the locking screws provided a stiffer connection, the mixed screw configuration offered a balanced performance by combining the compression benefits of standard screws with the rigid fixation of locking screws. Configurations with a single standard screw complemented by locking screws showed enhanced stability, suggesting this combination could be advantageous in clinical applications. This study underscores the importance of screw type and placement in ensuring the primary stability of ARCs. Locking screws are recommended for use when feasible. For ARCs allowing both screw types, a mixed configuration starting with a standard compression screw followed by locking screws appears optimal. Future research should further explore various combinations of screw geometries and lengths to refine these findings and enhance surgical outcomes in acetabular revisions.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

AcetabulumBone ScrewsMechanical PhenomenaHip ProsthesisComputer SimulationFinite Element AnalysisStress, MechanicalHumansReoperationBiomechanical PhenomenaMaterials Testing

Autor:innen und Institutionen

  • Department of Mechanical and Aerospace Engineering, Politecnico di Torino, Corso Duca degli Abruzzi 24, Torino 10129, Italy; PolitoBIOMed Lab, Politecnico di Torino, Corso Duca degli Abruzzi 24, Torino 10129, Italy.
  • Orthopedic and Traumatology Unit, Regional Center for Joint Replacement Revision Surgery, San Bortolo Hospital, Viale Ferdinando Rodolfi 37, Vicenza 36100, Italy.
  • Department of Mechanical and Aerospace Engineering, Politecnico di Torino, Corso Duca degli Abruzzi 24, Torino 10129, Italy.
  • Department of Surgical Sciences, University of Turin, Corso Achille Mario Dogliotti 14, Torino 10126, Italy.
  • University of Turin.
  • Ospedale San Bortolo.

ORCID-Profile: Federico Andrea Bologna, Mara Terzini, Cristina Bignardi

Zitieren

APA

Andrea Bologna, F., Elena, N., Bentivoglio, D., Aprato, A., Terzini, M., Bignardi, C., Giaretta, S., & Momoli, A. (2025). In Silico Evaluation of the Primary Stability of Acetabular Revision Cups: Standard Versus Locking Screws. Journal of Biomechanical Engineering, 147(5). https://doi.org/10.1115/1.4068226

Vancouver

Andrea Bologna F, Elena N, Bentivoglio D, Aprato A, Terzini M, Bignardi C, et al. In Silico Evaluation of the Primary Stability of Acetabular Revision Cups: Standard Versus Locking Screws. Journal of Biomechanical Engineering. 2025;147(5). doi:10.1115/1.4068226

BibTeX
@article{AndreaBologna2025,
  author = {Andrea Bologna, Federico and Elena, Nicholas and Bentivoglio, Davide and Aprato, Alessandro and Terzini, Mara and Bignardi, Cristina and Giaretta, Stefano and Momoli, Alberto},
  title = {In Silico Evaluation of the Primary Stability of Acetabular Revision Cups: Standard Versus Locking Screws},
  journal = {Journal of Biomechanical Engineering},
  year = {2025},
  volume = {147},
  number = {5},
  doi = {10.1115/1.4068226}
}
Kostenlos starten →