EUVIMEDEUVIMED entdecken
Crossref

Effect of Laser Energy Density on Temperature Field, Forming Quality, and Performance of LPBF-Fabricated Nickel-Based Superalloy Composites

Jingjia Sun, Guangjing Huang, Dongdong Gu, Yuxi Zhang, Menghuan Yin, Qi Wu, Ruiqi Wang, Jianfeng Sun

Journal of Manufacturing Science and Engineering · 01.07.2025 · 147 (7)

DOI: 10.1115/1.4068162 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Manufacturing Science and Engineering, online erschienen am 09.04.2025. Verfasst von Jingjia Sun und 7 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 51 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Laser energy density plays a crucial role in determining the forming quality, microstructure, and mechanical properties of components fabricated by laser powder bed fusion (LPBF). Hexagonal boron nitride (h-BN) reinforced Hastelloy X (HX) composites of 0.2 wt% have been proven to eliminate cracks by regulating the laser absorption behavior and the temperature field, thereby reducing the temperature gradient and carbide segregation. This approach synergistically enhanced both the strength and elongation of HX formed via LPBF. However, the lack of process optimization studies for this system has hindered its broader industrial application. This study investigated the effects of varying laser energy densities on 0.2 wt% h-BN/HX composites and identified the optimal laser processing parameter. Experimental results showed that an optimal laser energy density of 41.67 J/mm3 resulted in the best microstructure, characterized by fine grains (10.97 µm), high densification (99.81%), and low surface roughness (Sa = 4.68 µm). The mechanical properties, including ultimate tensile strength (1259.18 MPa) and elongation (18.26%), were also maximized at this energy density. Additionally, the optimal energy density improved microstructural uniformity, dislocation density (kernel average misorientation (KAM) = 0.64), and texture strength (Taylor factor = 3.18). This study provides valuable insights into the influence of laser energy density on thermal behavior, forming quality, and mechanical performance of LPBF-manufactured 0.2 wt% h-BN/HX, offering guidance for optimizing LPBF processing parameters and enhancing the performance of nickel-based composites in advanced engineering applications.

Zitieren

APA

Sun, J., Huang, G., Gu, D., Zhang, Y., Yin, M., Wu, Q., Wang, R., & Sun, J. (2025). Effect of Laser Energy Density on Temperature Field, Forming Quality, and Performance of LPBF-Fabricated Nickel-Based Superalloy Composites. Journal of Manufacturing Science and Engineering, 147(7). https://doi.org/10.1115/1.4068162

Vancouver

Sun J, Huang G, Gu D, Zhang Y, Yin M, Wu Q, et al. Effect of Laser Energy Density on Temperature Field, Forming Quality, and Performance of LPBF-Fabricated Nickel-Based Superalloy Composites. Journal of Manufacturing Science and Engineering. 2025;147(7). doi:10.1115/1.4068162

BibTeX
@article{Sun2025,
  author = {Sun, Jingjia and Huang, Guangjing and Gu, Dongdong and Zhang, Yuxi and Yin, Menghuan and Wu, Qi and Wang, Ruiqi and Sun, Jianfeng},
  title = {Effect of Laser Energy Density on Temperature Field, Forming Quality, and Performance of LPBF-Fabricated Nickel-Based Superalloy Composites},
  journal = {Journal of Manufacturing Science and Engineering},
  year = {2025},
  volume = {147},
  number = {7},
  doi = {10.1115/1.4068162}
}
Kostenlos starten →