In Situ Variable Stiffness Strategy for a Planar Tensegrity Manipulator Using Quadratic Programming
Journal of Mechanical Design · 01.09.2025 · 147 (9)
DOI: 10.1115/1.4067922 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Mechanical Design, online erschienen am 13.03.2025. Verfasst von Yanghui Chen und 5 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 41 Literaturangaben.
Abstract (Originalsprache)
Tensegrity manipulators are rigid-flexible coupling elastic mechanisms with complex stiffness characteristics. By changing the prestress levels of tensile cables, the manipulators become versatile mechanisms with variable stiffness. This allows them to maneuvering steadily in high stiffness mode during transport tasks while exhibiting good carrying capacity and hold enhanced compliance for interactive safety in lower stiffness mode. However, it is difficult to achieve the desirable pose and desired stiffness simultaneously for tensegrity manipulators due to the strong correlation between the equilibrium pose and the prestress state. This article proposes an in situ variable stiffness strategy for the dual-triangle planar tensegrity manipulator (DTPTM), which can change the manipulator’s stiffness without changing its pose. First, a static model is developed for the tensegrity manipulator under external constraints in terms of natural coordinates. Then, the tangent stiffness matrix is derived and reduced based on the statics model and the corresponding null space matrix. By constructing the objective function, the variable stiffness strategy is established as a quadratic programming problem to vary the stiffness of all joints. On the basis of numerical results, we analyze the range of variable stiffness for the dual-triangle tensegrity (DTT) module and discuss the feasibility of the variable stiffness strategy. Finally, the variable stiffness strategy is verified by various simulation results and validated by hardware experiments of the 2-degrees-of-freedom manipulator prototype.
Zitieren
APA
Chen, Y., Luo, J., Liu, J., Xu, X., Jiang, J., & Chu, W. (2025). In Situ Variable Stiffness Strategy for a Planar Tensegrity Manipulator Using Quadratic Programming. Journal of Mechanical Design, 147(9). https://doi.org/10.1115/1.4067922
Vancouver
Chen Y, Luo J, Liu J, Xu X, Jiang J, Chu W. In Situ Variable Stiffness Strategy for a Planar Tensegrity Manipulator Using Quadratic Programming. Journal of Mechanical Design. 2025;147(9). doi:10.1115/1.4067922
BibTeX
@article{Chen2025,
author = {Chen, Yanghui and Luo, Jiahui and Liu, Jiafu and Xu, Xiaoming and Jiang, Jianping and Chu, Weimeng},
title = {In Situ Variable Stiffness Strategy for a Planar Tensegrity Manipulator Using Quadratic Programming},
journal = {Journal of Mechanical Design},
year = {2025},
volume = {147},
number = {9},
doi = {10.1115/1.4067922}
}
EUVIMED