Pore Size Control and Tribological Properties of Oil-Impregnated Porous Polyimide With Similar Porosity
Journal of Tribology · 01.09.2025 · 147 (9)
DOI: 10.1115/1.4067905 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Tribology, online erschienen am 17.03.2025. Verfasst von Zhengrong Xu und 8 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 35 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Zhejiang Province.
Abstract (Originalsprache)
Pore size is critical to the oil-storage performance and tribological properties of porous polyimide (PPI). To study the effect of pore size, four PPIs with different pore sizes and similar porosities were fabricated. The mechanical, oil-absorption, and tribological properties of the PPIs were investigated. According to the results, PPIs with larger pores demonstrate faster oil absorption and a higher oil-filling rate. However, larger pores contribute to a rougher surface and lower oil retention. These dual effects result in PPIs with larger pores displaying a low friction coefficient at low speeds but a high friction coefficient at high speeds. The effect of pore sizes on elastohydrodynamic (EHD) film and Stribeck curves were discussed from seepage effect and viscoelasticity of PPI, respectively. The permeability of the four PPIs was calculated based on mercury intrusion test results. Larger pores lead to higher permeability of PPI at lower pressure, which makes it easier to reduce thickness of EHD film, causing high friction and wear. The damping effect of PPIs, rather than a viscous flow, results in a slight increase in friction coefficient at high speed under micro-oil lubrication. Considering the tribological and oil-absorption properties, the preferred particle size of polyimide molding powder is 25–48 μm.
Förderung
- National Natural Science Foundation of China
- Natural Science Foundation of Zhejiang Province
Zitieren
APA
Xu, Z., Li, J., Li, K., Shi, C., Cui, Y., Zhou, N., Hua, L., Xia, R., & Qing, T. (2025). Pore Size Control and Tribological Properties of Oil-Impregnated Porous Polyimide With Similar Porosity. Journal of Tribology, 147(9). https://doi.org/10.1115/1.4067905
Vancouver
Xu Z, Li J, Li K, Shi C, Cui Y, Zhou N, et al. Pore Size Control and Tribological Properties of Oil-Impregnated Porous Polyimide With Similar Porosity. Journal of Tribology. 2025;147(9). doi:10.1115/1.4067905
BibTeX
@article{Xu2025,
author = {Xu, Zhengrong and Li, Jinbang and Li, Kai and Shi, Chenchun and Cui, Yuguo and Zhou, Ningning and Hua, Licheng and Xia, Renliang and Qing, Tao},
title = {Pore Size Control and Tribological Properties of Oil-Impregnated Porous Polyimide With Similar Porosity},
journal = {Journal of Tribology},
year = {2025},
volume = {147},
number = {9},
doi = {10.1115/1.4067905}
}
EUVIMED