Multi-Robot Scan-n-Print for Wire Arc Additive Manufacturing
ASME Letters in Translational Robotics · 2025
DOI: 10.1115/1.4067825 ↗Kurz gefasst
Fachartikel in der Zeitschrift ASME Letters in Translational Robotics, 2025. Verfasst von Chen-Lung Lu und 7 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 23 Literaturangaben. Gefördert von: Office of the Secretary of Defense.
Abstract (Originalsprache)
Robotic Wire Arc Additive Manufacturing (WAAM) is a metal additive manufacturing technology offering flexible 3D printing while ensuring high-quality near-net-shape final parts. However, WAAM also suffers from geometric imprecision, especially for low-melting-point metals such as aluminum alloys. In this article, we present a multi-robot framework for WAAM process monitoring and control. We consider a three-robot setup: a 6-DoF welding robot, a 2-DoF trunnion platform, and a 6-DoF sensing robot with a wrist-mounted laser line scanner measuring the printed part height profile. The welding parameters, including the wire feed rate, are held constant based on the materials used, so the control input is the robot path speed. The measured output is the part height profile. The planning phase decomposes the target shape into slices of uniform height. During runtime, the sensing robot scans each printed layer, and the robot path speed for the next layer is adjusted based on the deviation from the desired profile. The adjustment is based on an identified model correlating the path speed to changes in height. The control architecture coordinates the synchronous motion and data acquisition between all robots and sensors. Using a three-robot WAAM testbed, we demonstrate significant improvements of the closed-loop scan-n-print approach over the current open loop result on both a flat wall and a more complex turbine blade shape.
Förderung
- Office of the Secretary of Defense
Zitieren
APA
Lu, C., He, H., Ren, J., Dhar, J., Saunders, G., Julius, A., Samuel, J., & Wen, J. T. (2025). Multi-Robot Scan-n-Print for Wire Arc Additive Manufacturing. ASME Letters in Translational Robotics. https://doi.org/10.1115/1.4067825
Vancouver
Lu C, He H, Ren J, Dhar J, Saunders G, Julius A, et al. Multi-Robot Scan-n-Print for Wire Arc Additive Manufacturing. ASME Letters in Translational Robotics. 2025. doi:10.1115/1.4067825
BibTeX
@article{Lu2025,
author = {Lu, Chen-Lung and He, Honglu and Ren, Jinhan and Dhar, Joni and Saunders, Glenn and Julius, Agung and Samuel, Johnson and Wen, John T.},
title = {Multi-Robot Scan-n-Print for Wire Arc Additive Manufacturing},
journal = {ASME Letters in Translational Robotics},
year = {2025},
doi = {10.1115/1.4067825}
}
EUVIMED