EUVIMEDEUVIMED entdecken
Crossref

Investigation of Thermal Cutoff Energy for Accurate Analysis of High-Temperature Engineering Test Reactor

Satoshi Takeda, Takanori Kitada, Akio Yamamoto, Kazuya Yamaji, Hiroki Koike, Koji Asano

Journal of Nuclear Engineering and Radiation Science · 01.10.2025 · 11 (4)

DOI: 10.1115/1.4067755 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Nuclear Engineering and Radiation Science, online erschienen am 04.08.2025. Verfasst von Satoshi Takeda und 5 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 14 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the appropriate thermal cutoff energy for neutron transport calculations in the High-Temperature Engineering Test Reactor (HTTR). Using the Monte Carlo calculation code mvp3.0, the impact of changing thermal cutoff energy on the multiplication factor was evaluated for the single fuel element geometry of HTTR, focusing on variations in fuel and moderator temperatures at the beginning of life (BOL) and end of life (EOL). In the default model of mvp3.0, resonance scattering is approximated by the free-monatomic-gas model with constant cross section. Therefore, the impact of using the exact model for resonance scattering was additionally examined. In the free-monatomic-gas model, a thermal cutoff energy of 30 eV is at least required to maintain the multiplication factor error within approximately ±50 pcm for both BOL and EOL. In addition, the results show that the impact of using the exact model instead of the free-monatomic-gas model on the multiplication factor is more than 200 pcm in the 30–40 eV range where U-238 has large resonance at 37 eV, and the impact becomes less than 50 pcm above 40 eV. These results indicate that a thermal cutoff energy of at least 30 eV is necessary without considering the effects of the exact model, and the energy range up to the 37 eV resonance needs to be considered in the case of applying the exact model to obtain the saturated results on multiplication factor for HTTR.

Zitieren

APA

Takeda, S., Kitada, T., Yamamoto, A., Yamaji, K., Koike, H., & Asano, K. (2025). Investigation of Thermal Cutoff Energy for Accurate Analysis of High-Temperature Engineering Test Reactor. Journal of Nuclear Engineering and Radiation Science, 11(4). https://doi.org/10.1115/1.4067755

Vancouver

Takeda S, Kitada T, Yamamoto A, Yamaji K, Koike H, Asano K. Investigation of Thermal Cutoff Energy for Accurate Analysis of High-Temperature Engineering Test Reactor. Journal of Nuclear Engineering and Radiation Science. 2025;11(4). doi:10.1115/1.4067755

BibTeX
@article{Takeda2025,
  author = {Takeda, Satoshi and Kitada, Takanori and Yamamoto, Akio and Yamaji, Kazuya and Koike, Hiroki and Asano, Koji},
  title = {Investigation of Thermal Cutoff Energy for Accurate Analysis of High-Temperature Engineering Test Reactor},
  journal = {Journal of Nuclear Engineering and Radiation Science},
  year = {2025},
  volume = {11},
  number = {4},
  doi = {10.1115/1.4067755}
}
Kostenlos starten →