EUVIMEDEUVIMED entdecken
Crossref

On the Mechanism of Rotating Stall in a Boundary Layer Ingesting Fan

Hefang Deng, Songan Zhang, Kailong Xia, Xiaoqing Qiang, Mingmin Zhu, Jinfang Teng

Journal of Engineering for Gas Turbines and Power · 01.09.2025 · 147 (9)

DOI: 10.1115/1.4067737 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Engineering for Gas Turbines and Power, online erschienen am 26.02.2025. Verfasst von Hefang Deng und 5 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 44 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Next-generation boundary layer ingesting (BLI) aircraft can achieve significant reductions in fuel burns compared to conventional aircraft. One of the challenges for BLI aircraft is the need for the fan to continuously operate with inlet distortions. However, until now the effect of real BLI distortions on rotating stall remains unclear. In this work, full-annulus unsteady simulations are conducted to analyze the mechanism of rotating stalls in a boundary layer ingesting fan. The complete stall hysteresis loop at BLI distortions is investigated. Similar to the uniform inflow, the fan at the BLI distortions also exhibits the spike-type rotating stalls, and its stall inception is also attributed to the radial vortex structure caused by the shear interaction between the incoming flow and backflow. However, at the BLI distortions, the evolution process of rotating stall is accompanied by the growth and decay of disturbances because of the significant variation of the inflow condition around the whole annulus. Only when the stall disturbance becomes large enough can it propagate circumferentially across the whole annulus to form the full stall cell. In addition, due to the significant decrease in total pressure ratio, the fan at the BLI distortions is easier to exit the rotating stall compared to the uniform inflow. These results enhance the understanding of the rotating stall mechanism not only for BLI fans but also for many turbine engines that suffer from inlet distortions.

Zitieren

APA

Deng, H., Zhang, S., Xia, K., Qiang, X., Zhu, M., & Teng, J. (2025). On the Mechanism of Rotating Stall in a Boundary Layer Ingesting Fan. Journal of Engineering for Gas Turbines and Power, 147(9). https://doi.org/10.1115/1.4067737

Vancouver

Deng H, Zhang S, Xia K, Qiang X, Zhu M, Teng J. On the Mechanism of Rotating Stall in a Boundary Layer Ingesting Fan. Journal of Engineering for Gas Turbines and Power. 2025;147(9). doi:10.1115/1.4067737

BibTeX
@article{Deng2025,
  author = {Deng, Hefang and Zhang, Songan and Xia, Kailong and Qiang, Xiaoqing and Zhu, Mingmin and Teng, Jinfang},
  title = {On the Mechanism of Rotating Stall in a Boundary Layer Ingesting Fan},
  journal = {Journal of Engineering for Gas Turbines and Power},
  year = {2025},
  volume = {147},
  number = {9},
  doi = {10.1115/1.4067737}
}
Kostenlos starten →