Thermodynamic Analysis of Basic and Regenerative Organic Rankine Cycle Configurations Using Six Working Fluids: A Parametric Study With CoolProp in MATLAB
Journal of Energy Resources Technology, Part A: Sustainable and Renewable Energy · 01.07.2025 · 1 (4)
DOI: 10.1115/1.4067544 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Energy Resources Technology, Part A: Sustainable and Renewable Energy, online erschienen am 20.01.2025. Verfasst von Imane Salhi und 3 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 29 Literaturangaben.
Abstract (Originalsprache)
Organic Rankine Cycle (ORC) is a promising solution for reducing the environmental impact of electricity production. It operates with waste heat from industrial processes and uses low and medium-temperature heat sources. The originality of this work lies not only in conducting an energy analysis of basic and regenerative ORC but also in performing exergy analysis to identify the processes responsible for exergy destruction and losses. It also compares both configurations regarding energy efficiency, exergy efficiency, network, heat required, and exergy destruction rate. Matlab Software runs the simulation using the Coolprop open-source library. These parametric investigations and thermodynamic modelings were undertaken on six working fluids (R113, R134a, R600, R290, R1234yf, and HFE-143 m). Results show a maximum improvement of 17.8% in thermal efficiency and 17.6% in exergy efficiency when transitioning from the basic to the regenerative configuration. Furthermore, the regenerative configuration has about 43% less exergy destruction compared to the basic configuration.
Zitieren
APA
Salhi, I., Sadni, F. E., Belhora, F., & Hajjaji, A. (2025). Thermodynamic Analysis of Basic and Regenerative Organic Rankine Cycle Configurations Using Six Working Fluids: A Parametric Study With CoolProp in MATLAB. Journal of Energy Resources Technology, Part A: Sustainable and Renewable Energy, 1(4). https://doi.org/10.1115/1.4067544
Vancouver
Salhi I, Sadni FE, Belhora F, Hajjaji A. Thermodynamic Analysis of Basic and Regenerative Organic Rankine Cycle Configurations Using Six Working Fluids: A Parametric Study With CoolProp in MATLAB. Journal of Energy Resources Technology, Part A: Sustainable and Renewable Energy. 2025;1(4). doi:10.1115/1.4067544
BibTeX
@article{Salhi2025,
author = {Salhi, Imane and Sadni, Fatima ezzahra and Belhora, Fouad and Hajjaji, Abdelowahed},
title = {Thermodynamic Analysis of Basic and Regenerative Organic Rankine Cycle Configurations Using Six Working Fluids: A Parametric Study With CoolProp in MATLAB},
journal = {Journal of Energy Resources Technology, Part A: Sustainable and Renewable Energy},
year = {2025},
volume = {1},
number = {4},
doi = {10.1115/1.4067544}
}
EUVIMED