EUVIMEDEUVIMED entdecken
Crossref

Turbulence Measurements in Axial Turbines Using Fast Response Aerodynamic Pressure Probes

Andrea Notaristefano, Giacomo Persico, Paolo Gaetani

Journal of Turbomachinery · 01.08.2025 · 147 (8)

DOI: 10.1115/1.4067440 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Turbomachinery, online erschienen am 30.01.2025. Verfasst von Andrea Notaristefano und 2 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 36 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Improving the comprehension of turbomachinery fluid-dynamics is vital to increase their performance and calls for the development or extension of advanced instrumentation. In this context, novel data acquisition and data reduction techniques have been recently developed at Politecnico di Milano for turbulence measurements performed with fast-response aerodynamic pressure probes (FRAPPs). These improvements address a gap in the capabilities of such probes, as turbulence data were among the few, yet very important, information they could provide only on a quality level. At first, the technique is validated against hot-wire measurements on a low-speed wind tunnel, where a combustor simulator is inserted with or without an upstream turbulence grid generator. Second, the developed methodology is applied downstream of both the stator and the rotor of a single-stage axial turbine, where the probe robustness and reliability are fully exploited to gain crucial flow information also in a harsh flow environment, where the use of hot wires might be critical. In this article, the measured turbulence intensity using FRAPP is compared among three different operating conditions obtained by changing the rotor rotational speed. Furthermore, the article explores the impact of nonuniform stage inlet conditions, which resemble the combustor outlet disturbances, on the stator and rotor flow features. The regions with the highest turbulence levels are observed in areas characterized by secondary flows, wakes, end-walls, and the residual swirl profile. The stator–rotor interaction contributes to the turbulence generation both downstream of the stator and the rotor. Additionally, an increase in blade loading corresponds to higher intensity in secondary flows, leading to elevated turbulence levels at the rotor exit. The injection of combustor nonuniformities has a diminished impact as the rotor load increases, given that the flow field becomes predominantly influenced by strong secondary flows.

Zitieren

APA

Notaristefano, A., Persico, G., & Gaetani, P. (2025). Turbulence Measurements in Axial Turbines Using Fast Response Aerodynamic Pressure Probes. Journal of Turbomachinery, 147(8). https://doi.org/10.1115/1.4067440

Vancouver

Notaristefano A, Persico G, Gaetani P. Turbulence Measurements in Axial Turbines Using Fast Response Aerodynamic Pressure Probes. Journal of Turbomachinery. 2025;147(8). doi:10.1115/1.4067440

BibTeX
@article{Notaristefano2025,
  author = {Notaristefano, Andrea and Persico, Giacomo and Gaetani, Paolo},
  title = {Turbulence Measurements in Axial Turbines Using Fast Response Aerodynamic Pressure Probes},
  journal = {Journal of Turbomachinery},
  year = {2025},
  volume = {147},
  number = {8},
  doi = {10.1115/1.4067440}
}
Kostenlos starten →