EUVIMEDEUVIMED entdecken
Crossref

Development of Heat Exchanger Modeling Capability for a Finite-Volume Aeroelasticity Solver

Sam Mitchell, Irene Tartaruga, Sina Stapelfeldt

Journal of Turbomachinery · 01.08.2025 · 147 (8)

DOI: 10.1115/1.4067380 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Turbomachinery, online erschienen am 13.01.2025. Verfasst von Sam Mitchell und 2 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 32 Literaturangaben. Gefördert von: Rolls-Royce.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Heat exchangers are frequently used in aero-engines and are known to significantly affect the surrounding steady and unsteady flow. In certain applications, they may thereby also influence the aeroelastic stability of upstream or downstream components, but there is limited research on this in the public domain. This article aims to demonstrate the influence of heat exchangers on unsteady flows relevant to aeroelastic problems. This is achieved by developing heat exchanger modeling capability for an in-house finite volume aeroelasticity solver, for which heat exchanger is represented as a porous medium, as this is the established approach in existing aerodynamic studies using commercial computational fluid dynamics (CFD) software. The governing equations for a Darcy–Forchheimer porous media model suitable for unsteady and compressible flows are presented, which are derived by the application of volume-averaging theory to the Navier–Stokes equations. The implementation of this model within the time integration method used for the solver is then described and verified by comparison of results for steady flows against an established commercial CFD solver, where close agreement between both in-house and commercial solvers has been observed. Lastly, a preliminary demonstration of the capability to model unsteady heat exchanger flows is presented by application to an aeroacoustic problem, where the interaction of the pressure waves and the heat exchanger is investigated.

Förderung

  • Rolls-Royce

Zitieren

APA

Mitchell, S., Tartaruga, I., & Stapelfeldt, S. (2025). Development of Heat Exchanger Modeling Capability for a Finite-Volume Aeroelasticity Solver. Journal of Turbomachinery, 147(8). https://doi.org/10.1115/1.4067380

Vancouver

Mitchell S, Tartaruga I, Stapelfeldt S. Development of Heat Exchanger Modeling Capability for a Finite-Volume Aeroelasticity Solver. Journal of Turbomachinery. 2025;147(8). doi:10.1115/1.4067380

BibTeX
@article{Mitchell2025,
  author = {Mitchell, Sam and Tartaruga, Irene and Stapelfeldt, Sina},
  title = {Development of Heat Exchanger Modeling Capability for a Finite-Volume Aeroelasticity Solver},
  journal = {Journal of Turbomachinery},
  year = {2025},
  volume = {147},
  number = {8},
  doi = {10.1115/1.4067380}
}
Kostenlos starten →