EUVIMEDEUVIMED entdecken
Crossref

Effects of Lattice Orientation Angle on TPMS-Based Transpiration Cooling

Juchan Son, Mohsen Brouman, Yeongmin Pyo, Patrick Richer, Bertrand Jodoin, Zekai Hong

Journal of Engineering for Gas Turbines and Power · 01.09.2025 · 147 (9)

DOI: 10.1115/1.4067378 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Engineering for Gas Turbines and Power, online erschienen am 29.01.2025. Verfasst von Juchan Son und 5 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 43 Literaturangaben. Gefördert von: National Research Council Canada.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Establishing a continuous cooling film is an effective way to thermally protect hot-gas path components of gas turbines. For aero-engines, effusion cooling is the state-of-the-art method for developing cooling films. However, the cooling film generated by this method is far from ideal, as discrete miniature cooling air jets exiting from effusion cooling holes leave large gaps between cooling holes without adequate cooling film protection. Furthermore, effusion cooling jets can experience strong liftoff from component surfaces and are subsequently diluted due to mixing with the main flow. Recent advances in additive manufacturing (AM) technologies have enabled the fabrication of porous materials with precisely engineered lattice structures, significantly enhancing the film cooling effectiveness of hot-gas path components through transpiration cooling. A prior study has demonstrated highly promising transpiration cooling results by using a family of lattice geometries referred to as triply periodic minimal surface (TPMS) lattices. The present study experimentally investigates the influence of various TPMS lattice orientations on the film cooling effectiveness. Three types of TPMS structures, namely, diamond, Koch, and gyroid, are compared to demonstrate that the TPMS lattice orientation angle affects transpiration cooling performance, with different levels of sensitivity according to the TPMS structure. The TPMS lattice structures studied in this investigation are fabricated by stereolithography (SLA) three-dimensional printing. The adiabatic cooling film effectiveness (AFE) is measured using pressure sensitive paint (PSP).

Förderung

  • National Research Council Canada

Zitieren

APA

Son, J., Brouman, M., Pyo, Y., Richer, P., Jodoin, B., & Hong, Z. (2025). Effects of Lattice Orientation Angle on TPMS-Based Transpiration Cooling. Journal of Engineering for Gas Turbines and Power, 147(9). https://doi.org/10.1115/1.4067378

Vancouver

Son J, Brouman M, Pyo Y, Richer P, Jodoin B, Hong Z. Effects of Lattice Orientation Angle on TPMS-Based Transpiration Cooling. Journal of Engineering for Gas Turbines and Power. 2025;147(9). doi:10.1115/1.4067378

BibTeX
@article{Son2025,
  author = {Son, Juchan and Brouman, Mohsen and Pyo, Yeongmin and Richer, Patrick and Jodoin, Bertrand and Hong, Zekai},
  title = {Effects of Lattice Orientation Angle on TPMS-Based Transpiration Cooling},
  journal = {Journal of Engineering for Gas Turbines and Power},
  year = {2025},
  volume = {147},
  number = {9},
  doi = {10.1115/1.4067378}
}
Kostenlos starten →