EUVIMEDEUVIMED entdecken
Crossref

Experimental Demonstration of a Topology Optimization Method to Generate a Capacity-Specific Device With Cavitation Resistance for Control Valve Applications

Bruce J. Butler, Joe Alexandersen, Sameer R. Rao

Journal of Fluids Engineering · 01.05.2025 · 147 (5)

DOI: 10.1115/1.4067310 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Fluids Engineering, online erschienen am 23.12.2024. Verfasst von Bruce J. Butler und 2 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 35 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Topology optimization (TO) is a powerful method of generating structures that have desirable functional performance, to date most commonly used to improve structural behavior or to optimize pressure drops in laminar flow environments. In this study, we use TO to generate free-form pressure-staging geometries for the purposes of cavitation suppression in a turbulent flow device, an industrial flow control application which has not heretofore been addressed. Using variable permeability gradient-based adjoint TO in conjunction with both an out-of-plane resistance modified two-dimensional (2D) flow model and a penalty-term extended k–ε turbulence model, we generated flow channels of predetermined capacity that gradually reduce static pressure to suppress the initiation of cavitation. Three-dimensional (3D) extrusions of the 2D geometries were then printed using a masked stereolithography apparatus and evaluated using a water flow test in conjunction with acoustic cavitation detection. After testing, the results were compared to single and dual orifice baseline devices of equivalent capacity. The results of the experimental validations showed capacity deviations from target of up to 7% with performance improvements, as characterized by the delay of incipient cavitation, of up to 13% over the capacity-equivalent two-stage baseline device. This study demonstrates a new ability to rapidly generate fit-to-purpose devices at significantly reduced engineering effort using topology optimization methods.

Zitieren

APA

Butler, B. J., Alexandersen, J., & Rao, S. R. (2025). Experimental Demonstration of a Topology Optimization Method to Generate a Capacity-Specific Device With Cavitation Resistance for Control Valve Applications. Journal of Fluids Engineering, 147(5). https://doi.org/10.1115/1.4067310

Vancouver

Butler BJ, Alexandersen J, Rao SR. Experimental Demonstration of a Topology Optimization Method to Generate a Capacity-Specific Device With Cavitation Resistance for Control Valve Applications. Journal of Fluids Engineering. 2025;147(5). doi:10.1115/1.4067310

BibTeX
@article{Butler2025,
  author = {Butler, Bruce J. and Alexandersen, Joe and Rao, Sameer R.},
  title = {Experimental Demonstration of a Topology Optimization Method to Generate a Capacity-Specific Device With Cavitation Resistance for Control Valve Applications},
  journal = {Journal of Fluids Engineering},
  year = {2025},
  volume = {147},
  number = {5},
  doi = {10.1115/1.4067310}
}
Kostenlos starten →