EUVIMEDEUVIMED entdecken
Crossref

Estimation of Joint Kinetics During Manual Material Handling Using Inertial Motion Capture: A Follow-Up Study

Sebastian Skals, Mark de Zee iD, Michael Skipper Andersen iD

Journal of Biomechanical Engineering · 01.02.2025 · 147 (2)

DOI: 10.1115/1.4067103 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Biomechanical Engineering, online erschienen am 27.11.2024. Verfasst von Sebastian Skals und 2 weiteren Autor:innen. Beteiligte Einrichtung: The National Research Centre for the Working Environment, Lersø Parkalle 105, Copenhagen East 2100, Denmark. Hauptthemen laut MEDLINE: Joints. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 62 Literaturangaben. Gefördert von: Teknologi og Produktion, Det Frie Forskningsråd.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Musculoskeletal models based on inertial motion capture (IMC) and ground reaction force (GRF) prediction hold great potential for field-based risk assessment of manual material handling (MMH). However, previous evaluations have identified inaccuracies in the methodology's estimation of spinal forces, while the accuracy of other key outcome variables is currently unclear. This study evaluated knee, shoulder, and L5–S1 joint reaction forces (JRFs) derived from a musculoskeletal model based on inertial motion capture and GRF prediction against a model based on simultaneously collected optical motion capture (OMC) and force plate measurements. Data from 19 healthy subjects performing lifts with various horizontal locations (HLs), deposit heights (DHs), and asymmetry angles (AAs) were analyzed, and the consistency and absolute agreement of the model estimates statistically compared. Despite varying levels of agreement across tasks and variables, considerable absolute differences were identified for the L5–S1 axial compression (AC) (root-mean-square error (RMSE) = 63.0–94.2%BW) and anteroposterior (AP) shear forces (RMSE = 40.9–80.6%BW) as well as the bilateral knee JRFs (RMSE = 78.9–117%BW). Glenohumeral JRFs and vertical GRFs exhibited the highest overall consistency (r = 0.33–0.91, median 0.78) and absolute agreement (RMSE = 7.63–34.9%BW), while the L5–S1 axial compression forces also showed decent consistency (r = 0.04–0.89, median 0.80). The findings generally align with prior evaluations, indicating persistent challenges with the accuracy of key outcome variables. While the modeling framework shows promise, further development of the methodology is encouraged to enhance its applicability in ergonomic evaluations.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

JointsHumansMaleFemaleBiomechanical PhenomenaAdultKineticsFollow-Up StudiesMechanical PhenomenaMovementModels, BiologicalMotionYoung AdultLiftingMotion Capture

Autor:innen und Institutionen

  • The National Research Centre for the Working Environment, Lersø Parkalle 105, Copenhagen East 2100, Denmark.
  • ExerciseTech, Department of Health Science and Technology, Aalborg University, Selma Lagerløfs Vej 249, Gistrup 9260, Denmark.
  • Center for Mathematical Modeling of Knee Osteoarthritis, Department of Materials and Production, Aalborg University, Fibigerstræde 14, Aalborg East 9220, Denmark.

ORCID-Profile: Mark de Zee, Michael Skipper Andersen

Förderung

  • Teknologi og Produktion, Det Frie Forskningsråd

Zitieren

APA

Skals, S., de Zee, M., & Skipper Andersen, M. (2025). Estimation of Joint Kinetics During Manual Material Handling Using Inertial Motion Capture: A Follow-Up Study. Journal of Biomechanical Engineering, 147(2). https://doi.org/10.1115/1.4067103

Vancouver

Skals S, de Zee M, Skipper Andersen M. Estimation of Joint Kinetics During Manual Material Handling Using Inertial Motion Capture: A Follow-Up Study. Journal of Biomechanical Engineering. 2025;147(2). doi:10.1115/1.4067103

BibTeX
@article{Skals2025,
  author = {Skals, Sebastian and de Zee, Mark and Skipper Andersen, Michael},
  title = {Estimation of Joint Kinetics During Manual Material Handling Using Inertial Motion Capture: A Follow-Up Study},
  journal = {Journal of Biomechanical Engineering},
  year = {2025},
  volume = {147},
  number = {2},
  doi = {10.1115/1.4067103}
}
Kostenlos starten →