Rapid Prototyping of Multiscale Flexible Printed Circuit Boards With NeXus, a Robotic Additive Manufacturing System
Journal of Micro and Nano Science and Engineering · 2025
DOI: 10.1115/1.4067037 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Micro and Nano Science and Engineering, 2025. Verfasst von Daniel T. Sills und 7 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 29 Literaturangaben.
Abstract (Originalsprache)
This paper demonstrates the NeXus system, a multiscale robotic additive manufacturing platform developed at the Louisville Automation and Robotics Research Institute, as a rapid prototyping tool through additively manufacturing a multilayer flexible printed circuit board (FPC) with a printed strain sensor and soldered surface mounted devices (SMD). Manufacturing of the demonstrator requires the application and curing of multiple materials with specialized properties, tools for automated assembly, and software advances to streamline the process enabling the use of industry-standardized programs to command the NeXus system. Additive manufacturing processes supported by the NeXus include aerosol jet printing (AJP) for fine feature silver conducting lines, direct write ink-jet printing for insulating materials, and intense pulsed light (IPL) for curing materials between depositions. The NeXus system transports and manipulates parts using a six-degree-of-freedom (DOF) high-precision positioner. Solder paste deposition and pick-and-place (PnP) procedures are performed by a 4DOF Selective Compliance Articulated Robot Arm (SCARA). Conversion methods between traditional printed circuit board (PCB) design software and production-ready command scripts were developed to translate basic drawings into command scripts. Multilayer structures with AJP 50-μm wide lines, an insulating bridge with a thickness of around 100 μm, and SMDs soldered to silver AJP pads were integrated within the demonstrator. An operational amplifier and other SMDs reduce the complexity of the accompanying control circuit and amplify the sensor's response by 1830 times. The successful fabrication of the demonstrator FPC highlights the rapid prototyping ability of the NeXus system.
Zitieren
APA
Sills, D. T., Sherehiy, A., Zhang, R., Jackson, D., Reynolds, H., Ratanayake, D., Caid, C., & Popa, D. O. (2025). Rapid Prototyping of Multiscale Flexible Printed Circuit Boards With NeXus, a Robotic Additive Manufacturing System. Journal of Micro and Nano Science and Engineering. https://doi.org/10.1115/1.4067037
Vancouver
Sills DT, Sherehiy A, Zhang R, Jackson D, Reynolds H, Ratanayake D, et al. Rapid Prototyping of Multiscale Flexible Printed Circuit Boards With NeXus, a Robotic Additive Manufacturing System. Journal of Micro and Nano Science and Engineering. 2025. doi:10.1115/1.4067037
BibTeX
@article{Sills2025,
author = {Sills, Daniel T. and Sherehiy, Andriy and Zhang, Ruoshi and Jackson, Douglas and Reynolds, Henry and Ratanayake, Dilan and Caid, Cassidy and Popa, Dan O.},
title = {Rapid Prototyping of Multiscale Flexible Printed Circuit Boards With NeXus, a Robotic Additive Manufacturing System},
journal = {Journal of Micro and Nano Science and Engineering},
year = {2025},
doi = {10.1115/1.4067037}
}
EUVIMED