An Improved Eulerian–Lagrangian Method Combined With Ductile Material Model for Cavitation Erosion Assessment
Journal of Fluids Engineering · 01.05.2025 · 147 (5)
DOI: 10.1115/1.4067036 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Fluids Engineering, online erschienen am 27.11.2024. Verfasst von Ziyang Wang und 4 weiteren Autor:innen. Die Arbeit wurde bisher 58-mal zitiert (Crossref) und nennt 72 Literaturangaben. Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
Cavitation erosion in hydraulic machinery constitutes a multifaceted, instantaneous physicochemical process resulting in material wear and decreased efficiency. This paper employs an enhanced Eulerian–Lagrangian method to evaluate cavitation erosion. The method captures erosive impact loads released by the nonspherical collapse of near-wall bubbles and integrates them with a one-dimensional ductile material mode, a capability lacking in traditional homogeneous mixture methods. A classic axisymmetric nozzle test case is conducted under four different cavitation numbers (σ = 0.8, 0.9, 1.09, and 1.6) to validate the reliability of the new approach. Qualitative and quantitative analysis demonstrates that the impact load distribution on the lower and upper walls aligns with experimental measurements. Compared with reference works, the new method accurately predicts the maximum wear position and yields a narrower erosion area closer to the experimental data. Moreover, the relative error of the minimum incubation time at σ = 0.9 on the lower wall calculated by the new method is 4.67%, and the relative error of the maximum wear rate is 36.6%. This method is pivotal for further studying how various materials respond to cavitation wear. Further analysis reveals that material response patterns are similar under cavitation erosion conditions at σ = 0.8, 0.9, and 1.09. In contrast, the material surface wear rate is reduced by 46.7%, and the incubation time nearly triples at σ = 1.6.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Wang, Z., Cheng, H., Luo, X., Peng, X., & Ji, B. (2025). An Improved Eulerian–Lagrangian Method Combined With Ductile Material Model for Cavitation Erosion Assessment. Journal of Fluids Engineering, 147(5). https://doi.org/10.1115/1.4067036
Vancouver
Wang Z, Cheng H, Luo X, Peng X, Ji B. An Improved Eulerian–Lagrangian Method Combined With Ductile Material Model for Cavitation Erosion Assessment. Journal of Fluids Engineering. 2025;147(5). doi:10.1115/1.4067036
BibTeX
@article{Wang2025,
author = {Wang, Ziyang and Cheng, Huaiyu and Luo, Xianwu and Peng, Xiaoxing and Ji, Bin},
title = {An Improved Eulerian–Lagrangian Method Combined With Ductile Material Model for Cavitation Erosion Assessment},
journal = {Journal of Fluids Engineering},
year = {2025},
volume = {147},
number = {5},
doi = {10.1115/1.4067036}
}
EUVIMED