Angular Kinematics at Minimum Toe Clearance in People With Transtibial Amputation Using Articulated and Nonarticulated Prosthesis
Journal of Biomechanical Engineering · 2025
DOI: 10.1115/1.4066958 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Biomechanical Engineering, 2025. Verfasst von Mauricio Riveras und 2 weiteren Autor:innen. Beteiligte Einrichtung: Human Movement Research Laboratory, IBB-UNER, Oro Verde, Entre Ríos E3100XAD, Argentina. Hauptthemen laut MEDLINE: Artificial Limbs, Toes, Tibia. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 48 Literaturangaben.
Abstract (Originalsprache)
Subjects with unilateral transtibial amputation exhibit altered minimum toe clearance (MTC) depending on the ankle prosthesis used. It has been suggested that a limited prosthetic ankle angle could be the cause of the change. The aim of this study was to investigate the alterations in kinematics in the joints responsible for the changes in MTC when using an articulating hydraulic ankle (AHA) prosthesis compared to a nonarticulating ankle (NAA) prosthesis. Twelve participants with unilateral transtibial amputation walked at their self-selected speed on a 10 m pathway. They used both the same AHA and NAA prosthetic models and the prosthetic characteristics were unchanged except for the ankle mechanisms and, consequently, its mass. Data from MTC and hip, knee, and ankle angles in the sagittal, frontal, and transversal plane at the time of MTC were statistically analyzed with a paired sample t-test. The AHA prosthesis showed significantly higher MTC mean (AHA=24.7 ± 9.6 mm versus NAA=17.4 ± 5.2 mm, P<0.01) and variability (13.4 ± 9.6 mm versus 6.7 ± 4.2 mm, P=0.03) on the prosthetic limb than the NAA. A higher mean MTC could be explained by an increase in ankle angle dorsiflexion (AHA=−1.2 ± 2.6 deg versus NAA=−2.9 ± 1.5 deg, P=0.01), while the variability of the prosthetic MTC appears to be influenced by changes in prosthetic mass. The results of this study suggest that ankle dorsiflexion during swing and the mass of the prosthesis have a direct influence in mean MTC and its variability, respectively.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Autor:innen und Institutionen
- Human Movement Research Laboratory, IBB-UNER, Oro Verde, Entre Ríos E3100XAD, Argentina.
- Department of Mechanical Engineering Sciences, University of Surrey, Guildford GU2 7XH, UK.
ORCID-Profile: Mauricio Riveras
Zitieren
APA
Riveras, M., Oldfield, M., & Catalfamo-Formento, P. (2025). Angular Kinematics at Minimum Toe Clearance in People With Transtibial Amputation Using Articulated and Nonarticulated Prosthesis. Journal of Biomechanical Engineering. https://doi.org/10.1115/1.4066958
Vancouver
Riveras M, Oldfield M, Catalfamo-Formento P. Angular Kinematics at Minimum Toe Clearance in People With Transtibial Amputation Using Articulated and Nonarticulated Prosthesis. Journal of Biomechanical Engineering. 2025. doi:10.1115/1.4066958
BibTeX
@article{Riveras2025,
author = {Riveras, Mauricio and Oldfield, Matthew and Catalfamo-Formento, Paola},
title = {Angular Kinematics at Minimum Toe Clearance in People With Transtibial Amputation Using Articulated and Nonarticulated Prosthesis},
journal = {Journal of Biomechanical Engineering},
year = {2025},
doi = {10.1115/1.4066958}
}
EUVIMED