EUVIMEDEUVIMED entdecken
Crossref

Heat Transfer Characteristics of Methane–Air-Premixed Jet Flames With Flat/Hemispherical Walls

Chun Zeng, Jianfeng Pan, Jinpeng Hua, Wenming Yang, Zhongjia Li, Muhammad Nauman

Journal of Energy Resources Technology, Part A: Sustainable and Renewable Energy · 01.03.2025 · 1 (2)

DOI: 10.1115/1.4066759 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Energy Resources Technology, Part A: Sustainable and Renewable Energy, online erschienen am 23.12.2024. Verfasst von Chun Zeng und 5 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 40 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The in-depth study of the mutual coupling between the flame and the wall can significantly enhance the efficiency of actual combustion devices. A two-dimensional numerical model was established for the heat transfer characteristics of methane–air-premixed jet flames on flat and hemispherical walls, respectively. An examination of the effects of wall shape on the heat transfer characteristics of methane/air flames was conducted as a function of the equivalence ratio (ϕ = 0.9–1.5), the mixture Reynolds number (Re = 300–800), and the burner-to-plate distance (H/d = 1–6). As the equivalence ratio and Reynolds number increase, the flame temperature increases on the surface near the wall, and the temperature near the flame centerline is higher under the influence of a hemispherical wall than it is under the influence of a plate. In addition, the wall's heat flux increases as both the equivalence ratio and the Reynolds number increase. It is observed that the heat flux of the hemispherical wall is greater than that of the flat plate near the stagnation point, whereas it is smaller at a distance from the stagnation point. Due to the burner-to-plate distance, thermal efficiency is maximized when the flame-premixed cone contacts the impact surface, which is the desired condition for optimal performance. Due to different operating conditions, the efficiency of heat transfer is always higher under the action of a flat plate than under the action of a hemispherical wall.

Zitieren

APA

Zeng, C., Pan, J., Hua, J., Yang, W., Li, Z., & Nauman, M. (2025). Heat Transfer Characteristics of Methane–Air-Premixed Jet Flames With Flat/Hemispherical Walls. Journal of Energy Resources Technology, Part A: Sustainable and Renewable Energy, 1(2). https://doi.org/10.1115/1.4066759

Vancouver

Zeng C, Pan J, Hua J, Yang W, Li Z, Nauman M. Heat Transfer Characteristics of Methane–Air-Premixed Jet Flames With Flat/Hemispherical Walls. Journal of Energy Resources Technology, Part A: Sustainable and Renewable Energy. 2025;1(2). doi:10.1115/1.4066759

BibTeX
@article{Zeng2025,
  author = {Zeng, Chun and Pan, Jianfeng and Hua, Jinpeng and Yang, Wenming and Li, Zhongjia and Nauman, Muhammad},
  title = {Heat Transfer Characteristics of Methane–Air-Premixed Jet Flames With Flat/Hemispherical Walls},
  journal = {Journal of Energy Resources Technology, Part A: Sustainable and Renewable Energy},
  year = {2025},
  volume = {1},
  number = {2},
  doi = {10.1115/1.4066759}
}
Kostenlos starten →