EUVIMEDEUVIMED entdecken
Crossref

Flow and Heat Transfer in a Ribbed Converging-Diverging U-Duct Under Rotating and Non-Rotating Conditions

Wanjae Kim, Tom I-P. Shih, Richard P. Dalton, Kenneth Mark Bryden, Sung Yong Chang, Gyu Sang Park

Journal of Turbomachinery · 01.03.2025 · 147 (3)

DOI: 10.1115/1.4066567 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Turbomachinery, online erschienen am 14.10.2024. Verfasst von Wanjae Kim und 5 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 49 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A numerical study based on steady Reynolds-averaged-Navier–Stokes (RANS) with the shear stress transport (SST) turbulence model was performed to investigate the flow and heat transfer in a ribbed U-duct with a rectangular cross section that converges linearly in the radially outward direction and diverges linearly in the radially inward direction under rotating and nonrotating conditions. Parameters examined include rotation number (Roi = 0, 0.0219, 0.0336, 0.0731), Reynolds number (Rei = 46,000, 100,000, and 154,000), and the duct's taper angle (α = 0 deg and 1.41 deg) under conditions relevant to gas turbines used for electric power generation. Results obtained show that increasing the taper angle from 0 deg to 1.41 deg, which appears negligibly small, significantly increases both the friction coefficient and the Nusselt number whether there is rotation or not. With rotation at Roi = 0.0336 and Rei = 100,000, the maximum increase in the average friction coefficient and Nusselt number was found to be 41.7% and 36.6%, respectively. Without rotation at Rei = 46,000, those are 11.5% and 14.7%, respectively.

Zitieren

APA

Kim, W., Shih, T. I., Dalton, R. P., Bryden, K. M., Chang, S. Y., & Park, G. S. (2025). Flow and Heat Transfer in a Ribbed Converging-Diverging U-Duct Under Rotating and Non-Rotating Conditions. Journal of Turbomachinery, 147(3). https://doi.org/10.1115/1.4066567

Vancouver

Kim W, Shih TI, Dalton RP, Bryden KM, Chang SY, Park GS. Flow and Heat Transfer in a Ribbed Converging-Diverging U-Duct Under Rotating and Non-Rotating Conditions. Journal of Turbomachinery. 2025;147(3). doi:10.1115/1.4066567

BibTeX
@article{Kim2025,
  author = {Kim, Wanjae and Shih, Tom I-P. and Dalton, Richard P. and Bryden, Kenneth Mark and Chang, Sung Yong and Park, Gyu Sang},
  title = {Flow and Heat Transfer in a Ribbed Converging-Diverging U-Duct Under Rotating and Non-Rotating Conditions},
  journal = {Journal of Turbomachinery},
  year = {2025},
  volume = {147},
  number = {3},
  doi = {10.1115/1.4066567}
}
Kostenlos starten →