EUVIMEDEUVIMED entdecken
Crossref

Understanding Residual Stress Evolution in Directed Energy Deposition With Interlayer Deformation

Abeer Mithal, Niroj Maharjan, Nicholas Yew Jin Tan, Youxiang Chew, Sridhar Idapalapati

Journal of Manufacturing Science and Engineering · 01.11.2024 · 146 (11)

DOI: 10.1115/1.4066333 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Manufacturing Science and Engineering, online erschienen am 19.09.2024. Verfasst von Abeer Mithal und 4 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 71 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Control of residual stresses (RS), inherent to fusion-based additive manufacturing (AM), process is important for the satisfactory mechanical performance of components. Recent work has attempted to control the RS profiles in AM components by applying mechanical peening between built layers. During laser powder bed fusion (LPBF), it has been shown that subsequent layer building does not relieve all the peening-induced compressive stresses. In this work, a similar study has been performed on a directed energy deposition (DED) process. It is shown that owing to the vastly different thermal profile in DED compared to LPBF, the compressive RS induced by peening, is completely alleviated during subsequent layer deposition for 316L stainless steel. Irrespective of the magnitude and depth, the peening-induced compressive stresses were not present in the final part. Experimental and numerical analyses revealed that stress relief due to intrinsic heating was insufficient to explain stress relaxation. Rather, the localized heating and constrained expansion from surrounding cold material was the mechanism responsible for strain redistribution and hence stress relaxation.

Zitieren

APA

Mithal, A., Maharjan, N., Tan, N. Y. J., Chew, Y., & Idapalapati, S. (2024). Understanding Residual Stress Evolution in Directed Energy Deposition With Interlayer Deformation. Journal of Manufacturing Science and Engineering, 146(11). https://doi.org/10.1115/1.4066333

Vancouver

Mithal A, Maharjan N, Tan NYJ, Chew Y, Idapalapati S. Understanding Residual Stress Evolution in Directed Energy Deposition With Interlayer Deformation. Journal of Manufacturing Science and Engineering. 2024;146(11). doi:10.1115/1.4066333

BibTeX
@article{Mithal2024,
  author = {Mithal, Abeer and Maharjan, Niroj and Tan, Nicholas Yew Jin and Chew, Youxiang and Idapalapati, Sridhar},
  title = {Understanding Residual Stress Evolution in Directed Energy Deposition With Interlayer Deformation},
  journal = {Journal of Manufacturing Science and Engineering},
  year = {2024},
  volume = {146},
  number = {11},
  doi = {10.1115/1.4066333}
}
Kostenlos starten →