Guideline for Large-Scale Analysis of Centrifugal Blower Using Wall-Resolved Large Eddy Simulation
Journal of Turbomachinery · 01.02.2025 · 147 (2)
DOI: 10.1115/1.4066277 ↗Kurz gefasst
Leitlinie in der Zeitschrift Journal of Turbomachinery, online erschienen am 07.10.2024. Verfasst von Kazuhiro Tsukamoto und 1 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 27 Literaturangaben.
Abstract (Originalsprache)
To reduce the number of prototypes during product design and accurately predict unsteady phenomena occurring at off-design points, a method for accurately predicting the performance of centrifugal blowers through numerical analysis is required. This article presents a guideline for accurately predicting the performance of centrifugal blowers using compressible flow analysis with large eddy simulation (LES). In LES analysis, it is important to have a grid resolution that resolves the minimum vortex scale near the wall (referred to as wall-resolved LES) and to consider detailed geometry such as the length of the suction pipe. The calculations in this study used a model blower, which is a scale model of a single-stage centrifugal blower for use in industrial plants. The model blower was experimentally measured for various parameters such as the blower pressure coefficient, the static-pressure-rise coefficients of the impeller and vane-less diffuser, the shaft power, and the pressure fluctuations at the inlet of the impeller and the inlet of the vane-less diffuser. The results of these measurements were compared with those obtained from the wall-resolved LES. The study confirmed that the accuracy of performance prediction can be improved to less than a 4.0% error in the blower pressure coefficient at both design and off-design operating points by resolving the minimum vortex scale with 14.6 billion-grid elements and considering the detailed geometry.
Zitieren
APA
Tsukamoto, K., & Kato, C. (2025). Guideline for Large-Scale Analysis of Centrifugal Blower Using Wall-Resolved Large Eddy Simulation. Journal of Turbomachinery, 147(2). https://doi.org/10.1115/1.4066277
Vancouver
Tsukamoto K, Kato C. Guideline for Large-Scale Analysis of Centrifugal Blower Using Wall-Resolved Large Eddy Simulation. Journal of Turbomachinery. 2025;147(2). doi:10.1115/1.4066277
BibTeX
@article{Tsukamoto2025,
author = {Tsukamoto, Kazuhiro and Kato, Chisachi},
title = {Guideline for Large-Scale Analysis of Centrifugal Blower Using Wall-Resolved Large Eddy Simulation},
journal = {Journal of Turbomachinery},
year = {2025},
volume = {147},
number = {2},
doi = {10.1115/1.4066277}
}
EUVIMED