EUVIMEDEUVIMED entdecken
Crossref

Improvement in Active Cell Proliferation Area at Higher Permeability With Novel TPMS Lattice Structure

Gajendra Kumar Nhaichaniya iD, Manish Kumar, Ram Dayal

Journal of Biomechanical Engineering · 01.11.2024 · 146 (11)

DOI: 10.1115/1.4066218 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Biomechanical Engineering, online erschienen am 06.09.2024. Verfasst von Gajendra Kumar Nhaichaniya und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Malaviya National Institute of Technology, Jaipur 302017, India. Hauptthemen laut MEDLINE: Cell Proliferation, Permeability. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 48 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The utilization of lattice-based scaffolds emerging as an advance technique over conventional bio-implants in Bone Tissue Engineering. In this study, totally six lattice structures are considered for permeability and wall shear stress (WSS) investigation. Namely triply periodic minimal surfaces (TPMS)-based Gyroid, Schwarz-P, Schwarz-D, and two beam-based structure—Cubic and Fluorite are compared with the proposed new lattice structure at porosity level of 80%, 75%, and 70%. The proposed new lattice has combine characteristic of Gyroid and Schwarz-D TPMS lattice. The permeability is determined through Darcy's law, where the pressure drop across the lattice structure is calculated using a computational fluid dynamics (CFD) tool at flowrate between 0.2 and 10 ml/min. The Cubic and Schwarz-P lattice structures exhibited the highest permeability but at the cost of a lower active surface area for WSS, measuring below 155 mm2, means least cell proliferation occurs while the permeability value in New Lattice structure is in the ideal range with the enhanced active surface area for WSS (514 mm2). The complex internal curvatures of New Lattice promote the cell proliferation while the through-pore holes allow the efficient cell seeding.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Cell ProliferationPermeabilityPorosityTissue ScaffoldsHydrodynamicsStress, MechanicalTissue EngineeringSurface Properties

Stichwörter der Autor:innen

TPMS latticenumerical modelingpermeabilitytissue engineeringwall shear stress

Autor:innen und Institutionen

  • Department of Mechanical Engineering, Malaviya National Institute of Technology, Jaipur 302017, India.

ORCID-Profile: Gajendra Kumar Nhaichaniya

Zitieren

APA

Nhaichaniya, G. K., Kumar, M., & Dayal, R. (2024). Improvement in Active Cell Proliferation Area at Higher Permeability With Novel TPMS Lattice Structure. Journal of Biomechanical Engineering, 146(11). https://doi.org/10.1115/1.4066218

Vancouver

Nhaichaniya GK, Kumar M, Dayal R. Improvement in Active Cell Proliferation Area at Higher Permeability With Novel TPMS Lattice Structure. Journal of Biomechanical Engineering. 2024;146(11). doi:10.1115/1.4066218

BibTeX
@article{Nhaichaniya2024,
  author = {Nhaichaniya, Gajendra Kumar and Kumar, Manish and Dayal, Ram},
  title = {Improvement in Active Cell Proliferation Area at Higher Permeability With Novel TPMS Lattice Structure},
  journal = {Journal of Biomechanical Engineering},
  year = {2024},
  volume = {146},
  number = {11},
  doi = {10.1115/1.4066218}
}
Kostenlos starten →