Structural–Parametric Synthesis of Single-Loop 6R and 7R Mechanisms Using Factorization of Motion Polynomials and Its Application in Grippers
Journal of Mechanical Design · 01.12.2024 · 146 (12)
DOI: 10.1115/1.4065724 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Mechanical Design, online erschienen am 12.07.2024. Verfasst von Meng Li und 3 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 36 Literaturangaben.
Abstract (Originalsprache)
In this study, the so-called quasi-spiral motion pattern of a particular 3R (revolute) chain, which could track a quasi-spiral curve, is discovered for application in enveloping gripping. Naturally, a novel perspective on the synthesis of 1-DOF (degree of freedom) single-loop 6R and 7R mechanisms is presented to implement the quasi-spiral motion pattern. In these processes, the method of factorization of the motion polynomials is used to synthesize a series of single-loop mechanisms with the motion to generate quasi-spiral curves. By employing the proposed method, numerous innovative 6R and 7R mechanisms have been developed to construct dual layers of grippers based on specific network regulations. Taking a novel 6R mechanism as an example, the forward solution of the mechanism is determined, and the relationship between different rotation angles is obtained. Then, the changes in each angle are displayed. Finally, the novel 6R and 7R mechanisms are employed as units to determine the networking method and assemble new types of grippers. Grippers formed by the aforementioned 1-DOF mechanisms exhibit the characteristics of enveloping grasping.
Zitieren
APA
Li, M., Liu, K., Liu, J., & Ding, H. (2024). Structural–Parametric Synthesis of Single-Loop 6R and 7R Mechanisms Using Factorization of Motion Polynomials and Its Application in Grippers. Journal of Mechanical Design, 146(12). https://doi.org/10.1115/1.4065724
Vancouver
Li M, Liu K, Liu J, Ding H. Structural–Parametric Synthesis of Single-Loop 6R and 7R Mechanisms Using Factorization of Motion Polynomials and Its Application in Grippers. Journal of Mechanical Design. 2024;146(12). doi:10.1115/1.4065724
BibTeX
@article{Li2024,
author = {Li, Meng and Liu, Kai and Liu, Jingfang and Ding, Huafeng},
title = {Structural–Parametric Synthesis of Single-Loop 6R and 7R Mechanisms Using Factorization of Motion Polynomials and Its Application in Grippers},
journal = {Journal of Mechanical Design},
year = {2024},
volume = {146},
number = {12},
doi = {10.1115/1.4065724}
}
EUVIMED