EUVIMEDEUVIMED entdecken
Open Access

Implant Strength Contributes to the Osseointegration Strength of Porous Metallic Materials

Elizabeth Mathey iD, Matthew H Pelletier iD, William R Walsh iD, Ken Gall, Dana Carpenter

Journal of Biomechanical Engineering · 01.10.2024 · 146 (10)

DOI: 10.1115/1.4065405 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Biomechanical Engineering, online erschienen am 13.05.2024. Verfasst von Elizabeth Mathey und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, University of Colorado Denver, 1200 Larimer St, Denver, CO 80204. Hauptthemen laut MEDLINE: Osseointegration, Finite Element Analysis, Materials Testing. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei in PubMed Central verfügbar.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Creating the optimal environment for effective and long term osseointegration is a heavily researched and sought-after design criteria for orthopedic implants. A validated multimaterial finite element (FE) model was developed to replicate and understand the results of an experimental in vivo push-out osseointegration model. The FE model results closely predicted global force (at 0.5 mm) and stiffness for the 50–90% porous implants with an r2 of 0.97 and 0.98, respectively. In addition, the FE global force at 0.5 mm showed a correlation to the maximum experimental forces with an r2 of 0.90. The highest porosity implants (80–90%) showed lower stiffnesses and more equitable load sharing but also failed at lower a global force level than the low porosity implants (50–70%). The lower strength of the high porosity implants caused premature plastic deformation of the implant itself during loading as well as significant deformations in the ingrown and surrounding bone, resulting in lower overall osseointegration strength, consistent with experimental measurements. The lower porosity implants showed a balance of sufficient bony ingrowth to support osseointegration strength coupled with implant mechanical properties to circumvent significant implant plasticity and collapse under the loading conditions. Together, the experimental and finite element modeling results support an optimal porosity in the range of 60–70% for maximizing osseointegration with current structure and loading.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

OsseointegrationFinite Element AnalysisMaterials TestingPorosityProstheses and ImplantsMechanical PhenomenaAnimalsMetalsStress, Mechanical

Stichwörter der Autor:innen

finite element modeling, osseointegration, gyroid, porous metallic material, bo…

Substanzen

Metals

Autor:innen und Institutionen

  • Department of Mechanical Engineering, University of Colorado Denver, 1200 Larimer St, Denver, CO 80204.
  • Prince of Wales Clinical School UNSW Sydney, Surgical and Orthopaedic Research Laboratories (SORL), Kensington 2031, Australia.
  • Pratt School of Engineering, Duke University, Durham, NC 27708.
  • Department of Mechanical Engineering, University of Colorado Denver, Denver, CO 80217-3364.

ORCID-Profile: Elizabeth Mathey, Matthew H Pelletier, William R Walsh

Zitieren

APA

Mathey, E., Pelletier, M. H., Walsh, W. R., Gall, K., & Carpenter, D. (2024). Implant Strength Contributes to the Osseointegration Strength of Porous Metallic Materials. Journal of Biomechanical Engineering, 146(10). https://doi.org/10.1115/1.4065405

Vancouver

Mathey E, Pelletier MH, Walsh WR, Gall K, Carpenter D. Implant Strength Contributes to the Osseointegration Strength of Porous Metallic Materials. Journal of Biomechanical Engineering. 2024;146(10). doi:10.1115/1.4065405

BibTeX
@article{Mathey2024,
  author = {Mathey, Elizabeth and Pelletier, Matthew H and Walsh, William R and Gall, Ken and Carpenter, Dana},
  title = {Implant Strength Contributes to the Osseointegration Strength of Porous Metallic Materials},
  journal = {Journal of Biomechanical Engineering},
  year = {2024},
  volume = {146},
  number = {10},
  doi = {10.1115/1.4065405}
}
Kostenlos starten →