Influence of Breath-Mimicking Ventilated Incubation on Three-Dimensional Bioprinted Respiratory Tissue Scaffolds
Journal of Biomechanical Engineering · 01.09.2024 · 146 (9)
DOI: 10.1115/1.4065214 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Biomechanical Engineering, online erschienen am 17.04.2024. Verfasst von Amanda Zimmerling und 3 weiteren Autor:innen. Beteiligte Einrichtung: Division of Biomedical Engineering, College of Engineering, University of Saskatchewan, 57 Campus Drive, Saskatoon, SK S7N 5A9, Canada; Vaccine and I…. Hauptthemen laut MEDLINE: Tissue Scaffolds, Bioprinting. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 33 Literaturangaben. Gefördert von: Natural Sciences and Engineering Research Council of Canada, University of Saskatchewan.
Abstract (Originalsprache)
Development of respiratory tissue constructs is challenging due to the complex structure of native respiratory tissue and the unique biomechanical conditions induced by breathing. While studies have shown that the inclusion of biomechanical stimulus mimicking physiological conditions greatly benefits the development of engineered tissues, to our knowledge no studies investigating the influence of biomechanical stimulus on the development of respiratory tissue models produced through three-dimensional (3D) bioprinting have been reported. This paper presents a study on the utilization of a novel breath-mimicking ventilated incubator to impart biomechanical stimulus during the culture of 3D respiratory bioprinted constructs. Constructs were bioprinted using an alginate/collagen hydrogel containing human primary pulmonary fibroblasts with further seeding of human primary bronchial epithelial cells. Biomechanical stimulus was then applied via a novel ventilated incubator capable of mimicking the pressure and airflow conditions of multiple breathing conditions: standard incubation, shallow breathing, normal breathing, and heavy breathing, over a two-week time period. At time points between 1 and 14 days, constructs were characterized in terms of mechanical properties, cell proliferation, and morphology. The results illustrated that incubation conditions mimicking normal and heavy breathing led to greater and more continuous cell proliferation and further indicated a more physiologically relevant respiratory tissue model.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Substanzen
Autor:innen und Institutionen
- Division of Biomedical Engineering, College of Engineering, University of Saskatchewan, 57 Campus Drive, Saskatoon, SK S7N 5A9, Canada; Vaccine and Infectious Disease Organization (VIDO), University of Saskatchewan, Sas…
- Division of Biomedical Engineering, College of Engineering, University of Saskatchewan, 57 Campus Drive, Saskatoon, SK S7N 5A9, Canada; RMD Engineering Inc., #1 Cory Place East Cory Industrial Park, RM Corman Park, Sask…
- Vaccine and Infectious Disease Organization (VIDO), University of Saskatchewan, Saskatoon, SK S7N 5E3, Canada.
- Division of Biomedical Engineering, College of Engineering, University of Saskatchewan, 57 Campus Drive, Saskatoon, SK S7N 5A9, Canada; Department of Mechanical Engineering, College of Engineering, University of Saskatc…
ORCID-Profile: Amanda Zimmerling
Förderung
- Natural Sciences and Engineering Research Council of Canada
- University of Saskatchewan
Zitieren
APA
Zimmerling, A., Boire, J., Zhou, Y., & Chen, X. (2024). Influence of Breath-Mimicking Ventilated Incubation on Three-Dimensional Bioprinted Respiratory Tissue Scaffolds. Journal of Biomechanical Engineering, 146(9). https://doi.org/10.1115/1.4065214
Vancouver
Zimmerling A, Boire J, Zhou Y, Chen X. Influence of Breath-Mimicking Ventilated Incubation on Three-Dimensional Bioprinted Respiratory Tissue Scaffolds. Journal of Biomechanical Engineering. 2024;146(9). doi:10.1115/1.4065214
BibTeX
@article{Zimmerling2024,
author = {Zimmerling, Amanda and Boire, Jim and Zhou, Yan and Chen, Xiongbiao},
title = {Influence of Breath-Mimicking Ventilated Incubation on Three-Dimensional Bioprinted Respiratory Tissue Scaffolds},
journal = {Journal of Biomechanical Engineering},
year = {2024},
volume = {146},
number = {9},
doi = {10.1115/1.4065214}
}
EUVIMED