General Muscle Torque Generator Model for a Two Degree-of-Freedom Shoulder Joint
Journal of Biomechanical Engineering · 2024
DOI: 10.1115/1.4065044 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Biomechanical Engineering, 2024. Verfasst von Sydney Bell und 2 weiteren Autor:innen. Beteiligte Einrichtung: Systems Design Engineering Department, University of Waterloo, Waterloo, ON N2L 3G1, Canada. Hauptthemen laut MEDLINE: Shoulder Joint. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 42 Literaturangaben.
Abstract (Originalsprache)
Muscle torque generators (MTGs) have been developed as an alternative to muscle-force models, reducing the muscle-force model complexity to a single torque at the joint. Current MTGs can only be applied to single Degree-of-freedom (DoF) joints, leading to complications in modeling joints with multiple-DoFs such as the shoulder. This study aimed to develop an MTG model that accounts for the coupling between 2-DoF at the shoulder joint: shoulder plane of elevation (horizontal abduction/adduction) and shoulder elevation (flexion/extension). Three different 2-DoF MTG equations were developed to model the coupling between these two movements. Net joint torques at the shoulder were determined for 20 participants (10 females and 10 males) in isometric, isokinetic, and passive tests. Curve and surface polynomial fitting were used to find the best general fit for the experimental data in terms of the different degrees of coupling. The models were validated against experimental isokinetic torque data. It was determined that implicit coupling that used interpolation between single-DoF MTGs resulted in the lowest root-mean-square percent error of 8.5%. The work demonstrated that general MTG models can predict torque results that are dependent on multiple-DoFs of the shoulder.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Systems Design Engineering Department, University of Waterloo, Waterloo, ON N2L 3G1, Canada.
- University of Waterloo.
ORCID-Profile: Sydney Bell, Ali Nasr
Zitieren
APA
Bell, S., Nasr, A., & McPhee, J. (2024). General Muscle Torque Generator Model for a Two Degree-of-Freedom Shoulder Joint. Journal of Biomechanical Engineering. https://doi.org/10.1115/1.4065044
Vancouver
Bell S, Nasr A, McPhee J. General Muscle Torque Generator Model for a Two Degree-of-Freedom Shoulder Joint. Journal of Biomechanical Engineering. 2024. doi:10.1115/1.4065044
BibTeX
@article{Bell2024,
author = {Bell, Sydney and Nasr, Ali and McPhee, John},
title = {General Muscle Torque Generator Model for a Two Degree-of-Freedom Shoulder Joint},
journal = {Journal of Biomechanical Engineering},
year = {2024},
doi = {10.1115/1.4065044}
}
EUVIMED