Spray Cooling Heat Transfer of a Two-Fluid Spray Atomizer
ASME Journal of Heat and Mass Transfer · 01.05.2024 · 146 (5)
DOI: 10.1115/1.4064686 ↗Kurz gefasst
Fachartikel in der Zeitschrift ASME Journal of Heat and Mass Transfer, online erschienen am 04.03.2024. Verfasst von Shou-Shing Hsieh und 3 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 25 Literaturangaben. Gefördert von: Ministry of Science and Technology, Taiwan.
Abstract (Originalsprache)
The paper presents an experimental study on the droplet size and velocity, as well as temperature distribution, of a two-fluid atomizer (dj = 1.6 mm; spray nozzle exit diameter) through optical nonintrusive interferometric particle image (IPI) and particle image velocimetry (PIV) measurements with five different air–liquid ratios (Rs) at three spray heights with three target-plate initial temperatures. Cold flow visualization was made for the spray height of 50 mm at 25 °C. The Saunter-mean diameter (d32) was measured at the target temperature of 25 °C without heating and found to be in the range of 34.22 μm to 42.62 μm in terms of a correlation with WedjRedj. The measured impact velocity at the spray height of 50 mm was of 10 m/s to 30 m/s with three different initial target temperatures. It was found that the impact velocity displayed a strong function of the initial temperature. Furthermore, both the cooling curve and transient boiling curve were obtained with the identified cooling/boiling parameters of the cooling rate, critical heat flux (CHF), Leidenfrost temperature (LFT), as well as the onset of nucleate boiling (ONB). The best cooling performance was found at R = 0.242 for a spray height of 50 mm with the corresponding cooling rate of −19.1 °C/s, CHF of 486 W/cm2, and heat transfer coefficient (HTC) of 2.85 W/cm2K.
Förderung
- Ministry of Science and Technology, Taiwan
Zitieren
APA
Hsieh, S., Huang, C., Lin, J., & Chen, Y. (2024). Spray Cooling Heat Transfer of a Two-Fluid Spray Atomizer. ASME Journal of Heat and Mass Transfer, 146(5). https://doi.org/10.1115/1.4064686
Vancouver
Hsieh S, Huang C, Lin J, Chen Y. Spray Cooling Heat Transfer of a Two-Fluid Spray Atomizer. ASME Journal of Heat and Mass Transfer. 2024;146(5). doi:10.1115/1.4064686
BibTeX
@article{Hsieh2024,
author = {Hsieh, Shou-Shing and Huang, Ching-Feng and Lin, Jhen and Chen, Yu-Ru},
title = {Spray Cooling Heat Transfer of a Two-Fluid Spray Atomizer},
journal = {ASME Journal of Heat and Mass Transfer},
year = {2024},
volume = {146},
number = {5},
doi = {10.1115/1.4064686}
}
EUVIMED