EUVIMEDEUVIMED entdecken
Crossref

Evaluation of an Elastomeric Honeycomb Bicycle Helmet Design to Mitigate Head Kinematics in Oblique Impacts

Annie R A King, Jennifer Rovt, Oren E Petel, Bosco Yu, Cheryl E Quenneville

Journal of Biomechanical Engineering · 2024

DOI: 10.1115/1.4064475 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Biomechanical Engineering, 2024. Verfasst von Annie R A King und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Biomedical Engineering, McMaster University, 1280 Main Street West, Hamilton, ON L8S 4L8, Canada. Hauptthemen laut MEDLINE: Craniocerebral Trauma, Brain Concussion, Brain Injuries, Traumatic. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 50 Literaturangaben. Gefördert von: Natural Sciences and Engineering Research Council of Canada.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Head impacts in bicycle accidents are typically oblique to the impact surface and transmit both normal and tangential forces to the head, causing linear and rotational head kinematics, respectively. Traditional expanded polystyrene (EPS) foam bicycle helmets are effective at preventing many head injuries, especially skull fractures and severe traumatic brain injuries (TBIs) (primarily from normal contact forces). However, the incidence of concussion from collisions (primarily from rotational head motion) remains high, indicating need for enhanced protection. An elastomeric honeycomb helmet design is proposed herein as an alternative to EPS foam to improve TBI protection and be potentially reusable for multiple impacts, and tested using a twin-wire drop tower. Small-scale normal and oblique impact tests showed honeycomb had lower oblique strength than EPS foam, beneficial for diffuse TBI protection by permitting greater shear deformation and had the potential to be reusable. Honeycomb helmets were developed based on the geometry of an existing EPS foam helmet, prototypes were three-dimensional-printed with thermoplastic polyurethane and full-scale flat and oblique drop tests were performed. In flat impacts, honeycomb helmets resulted in a 34% higher peak linear acceleration and 7% lower head injury criteria (HIC15) than EPS foam helmets. In oblique tests, honeycomb helmets resulted in a 30% lower HIC15 and 40% lower peak rotational acceleration compared to EPS foam helmets. This new helmet design has the potential to reduce the risk of TBI in a bicycle accident, and as such, reduce its social and economic burden. Also, the honeycomb design showed potential to be effective for repetitive impact events without the need for replacement, offering benefits to consumers.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Craniocerebral TraumaBrain ConcussionBrain Injuries, TraumaticHumansBiomechanical PhenomenaHead Protective DevicesBicyclingAcceleration

Stichwörter der Autor:innen

3D printingbicycle helmetconcussionhoneycombimpact mitigationimpact testingoblique impacttraumatic brain injury

Autor:innen und Institutionen

  • School of Biomedical Engineering, McMaster University, 1280 Main Street West, Hamilton, ON L8S 4L8, Canada.
  • Department of Mechanical and Aerospace Engineering, Carleton University, Ottawa, ON K1S 5B6, Canada.
  • Department of Mechanical Engineering, University of Victoria, Victoria, BC V8P 5C2, Canada; Department of Materials Science and Engineering, McMaster University, 1280 Main Street West, Hamilton, ON L8S 4L8, Canada.
  • School of Biomedical Engineering, McMaster University, 1280 Main Street West, Hamilton, ON L8S 4L8, Canada; Department of Mechanical Engineering, McMaster University, 1280 Main Street West, Hamilton, ON L8S 4L8, Canada.

Förderung

  • Natural Sciences and Engineering Research Council of Canada

Zitieren

APA

King, A. R. A., Rovt, J., Petel, O. E., Yu, B., & Quenneville, C. E. (2024). Evaluation of an Elastomeric Honeycomb Bicycle Helmet Design to Mitigate Head Kinematics in Oblique Impacts. Journal of Biomechanical Engineering. https://doi.org/10.1115/1.4064475

Vancouver

King ARA, Rovt J, Petel OE, Yu B, Quenneville CE. Evaluation of an Elastomeric Honeycomb Bicycle Helmet Design to Mitigate Head Kinematics in Oblique Impacts. Journal of Biomechanical Engineering. 2024. doi:10.1115/1.4064475

BibTeX
@article{King2024,
  author = {King, Annie R A and Rovt, Jennifer and Petel, Oren E and Yu, Bosco and Quenneville, Cheryl E},
  title = {Evaluation of an Elastomeric Honeycomb Bicycle Helmet Design to Mitigate Head Kinematics in Oblique Impacts},
  journal = {Journal of Biomechanical Engineering},
  year = {2024},
  doi = {10.1115/1.4064475}
}
Kostenlos starten →