EUVIMEDEUVIMED entdecken
Crossref

Bayesian-Optimized Riblet Surface Design for Turbulent Drag Reduction via Design-by-Morphing With Large Eddy Simulation

Sangjoon Lee, Haris Moazam Sheikh, Dahyun D. Lim, Grace X. Gu, Philip S. Marcus

Journal of Mechanical Design · 01.08.2024 · 146 (8)

DOI: 10.1115/1.4064413 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Mechanical Design, online erschienen am 01.02.2024. Verfasst von Sangjoon Lee und 4 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 69 Literaturangaben. Gefördert von: Air Force Office of Scientific Research.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A computational approach is presented for optimizing new riblet surface designs in turbulent channel flow for drag reduction, utilizing design-by-morphing (DbM), large Eddy simulation (LES), and Bayesian optimization (BO). The design space is generated using DbM to include a variety of novel riblet surface designs, which are then evaluated using LES to determine their drag-reducing capabilities. The riblet surface geometry and configuration are optimized for maximum drag reduction using the mixed-variable Bayesian optimization (MixMOBO) algorithm. A total of 125 optimization epochs are carried out, resulting in the identification of three optimal riblet surface designs that are comparable to or better than the reference drag reduction rate of 8%. The Bayesian-optimized designs commonly suggest riblet sizes of around 15 wall units, relatively large spacing compared to conventional designs, and spiky tips with notches for the riblets. Our overall optimization process is conducted within a reasonable physical time frame with up to 12-core parallel computing and can be practical for fluid engineering optimization problems that require high-fidelity computational design before materialization.

Förderung

  • Air Force Office of Scientific Research

Zitieren

APA

Lee, S., Sheikh, H. M., Lim, D. D., Gu, G. X., & Marcus, P. S. (2024). Bayesian-Optimized Riblet Surface Design for Turbulent Drag Reduction via Design-by-Morphing With Large Eddy Simulation. Journal of Mechanical Design, 146(8). https://doi.org/10.1115/1.4064413

Vancouver

Lee S, Sheikh HM, Lim DD, Gu GX, Marcus PS. Bayesian-Optimized Riblet Surface Design for Turbulent Drag Reduction via Design-by-Morphing With Large Eddy Simulation. Journal of Mechanical Design. 2024;146(8). doi:10.1115/1.4064413

BibTeX
@article{Lee2024,
  author = {Lee, Sangjoon and Sheikh, Haris Moazam and Lim, Dahyun D. and Gu, Grace X. and Marcus, Philip S.},
  title = {Bayesian-Optimized Riblet Surface Design for Turbulent Drag Reduction via Design-by-Morphing With Large Eddy Simulation},
  journal = {Journal of Mechanical Design},
  year = {2024},
  volume = {146},
  number = {8},
  doi = {10.1115/1.4064413}
}
Kostenlos starten →