An Improved Passage-Flow Turning Model for Forward-Curved Blades of Squirrel-Cage Fan
Journal of Turbomachinery · 01.05.2024 · 146 (5)
DOI: 10.1115/1.4064309 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Turbomachinery, online erschienen am 16.01.2024. Verfasst von Boyan Jiang und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 42 Literaturangaben. Gefördert von: China Postdoctoral Science Foundation.
Abstract (Originalsprache)
An improved passage-flow turning model (IPTM) was developed in this study to design high-performance forward-curved blades for squirrel-cage fans. The flow separation in blade passages and the corresponding fan performance were compared between IPTM and traditional methods through computational fluid dynamics (CFD). The results show that correcting the blade inlet angle, based on the zero-incidence design, is crucial to prevent separation of the passage mainstream from the blade pressure surface. The blade shape with second-order smoothness also exhibits the thinnest separation and highest efficiency when other design parameters remain constant. Considering these findings, the blades designed by IPTM outperform traditional blades with the same inlet and outlet angles. The optimal values of the turning radius R¯T and the decelerating factor of the leading half blade ɛ were determined based on the CFD results. The designed blade achieves high pressure when these two parameters satisfy R¯T=−0.185ε+0.29175, while achieving high efficiency when they satisfy R¯T=−0.31ε+0.4425. To confirm the advantages of IPTM, an optimal IPTM-based blade was manufactured and measured. The results indicated that the maximum increase in fan pressure and efficiency reaches 10% and 6%, respectively.
Förderung
- China Postdoctoral Science Foundation
Zitieren
APA
Jiang, B., Yang, X., Wang, J., Lin, Z., & Hu, J. (2024). An Improved Passage-Flow Turning Model for Forward-Curved Blades of Squirrel-Cage Fan. Journal of Turbomachinery, 146(5). https://doi.org/10.1115/1.4064309
Vancouver
Jiang B, Yang X, Wang J, Lin Z, Hu J. An Improved Passage-Flow Turning Model for Forward-Curved Blades of Squirrel-Cage Fan. Journal of Turbomachinery. 2024;146(5). doi:10.1115/1.4064309
BibTeX
@article{Jiang2024,
author = {Jiang, Boyan and Yang, Xiaopei and Wang, Jun and Lin, Zhiliang and Hu, Jinkang},
title = {An Improved Passage-Flow Turning Model for Forward-Curved Blades of Squirrel-Cage Fan},
journal = {Journal of Turbomachinery},
year = {2024},
volume = {146},
number = {5},
doi = {10.1115/1.4064309}
}
EUVIMED